Over spray...

A

Alexia

New member
I thought I taped off and covered as much as needed for painting the frame underneath my Jeep. Then I looked at my hood, which needs repainting any way, and it now has a very light black film over it. Clay has removed the majority of the film and made it difficult to see. So all of the over spray was not direct from the can, but settled from floating through the air.



I believe the next step would be a low cut finishing polish? I would imagine that should take care of the rest.
 
Alexia said:
I thought I taped off and covered as much as needed for painting the frame underneath my Jeep. Then I looked at my hood, which needs repainting any way, and it now has a very light black film over it. Clay has removed the majority of the film and made it difficult to see. So all of the over spray was not direct from the can, but settled from floating through the air.



I believe the next step would be a low cut finishing polish? I would imagine that should take care of the rest.
Click to expand...
If that doesn't remove the overspray move up to a more aggressive pad and polish and then work back down.
 
You must log in or register to reply here.
Back
Top