Orinda Auto Detail
Opti Coat Pro Certified
For anyone who has worked on one of these you know the paint is really hard and there is a lot of it. I was lucky enough to have a ton of experience with vehicles like this or I'm sure I would of drove my self insane when it took 4-8 passes with M105 to get rids out of this car. I didn't take a whole lot of pics on this one as usual I was over booked and in a hurry so to speak.
Washed and foamed with citrus apc/ 2 buckets x2 grit guards
Decon was done with Iron-x followed by 3m perfect it clay
Paint was corrected using only my dewalt 849x and orange/white CCS constant pressure pads with M105 and.... Black fire Duo SRC Compound and Finishing.
BFWD was the LSP of choice topped with Sig II.
Hammered comes to mind
Since it's really hard to see defects on camera under halogens I pulled it out side to fix the trunk so I could get a cpl working pics to show.
Thats after M105 and SRC Compound. There is some polish oil left there from the SRC compound but as you can see the rids/swirls are all corrected.
At this point the I was pretty much done with the car so after an IPA of the whole vehicle a did a cpl passes with SRC Finishing polish to just add that extra bling and clear up some light holograms in few places.
Thanks for looking
Joe Torbati
Orinda Auto Detail
Washed and foamed with citrus apc/ 2 buckets x2 grit guards
Decon was done with Iron-x followed by 3m perfect it clay
Paint was corrected using only my dewalt 849x and orange/white CCS constant pressure pads with M105 and.... Black fire Duo SRC Compound and Finishing.
BFWD was the LSP of choice topped with Sig II.


Hammered comes to mind

Since it's really hard to see defects on camera under halogens I pulled it out side to fix the trunk so I could get a cpl working pics to show.


Thats after M105 and SRC Compound. There is some polish oil left there from the SRC compound but as you can see the rids/swirls are all corrected.

At this point the I was pretty much done with the car so after an IPA of the whole vehicle a did a cpl passes with SRC Finishing polish to just add that extra bling and clear up some light holograms in few places.

Thanks for looking
Joe Torbati
Orinda Auto Detail