Optimum Opti-Mitt 8 Inch Foam Wash Mitt Now At ProperAutoCare.com

F

Freeman

New member
I was wondering if anyone ever uses masking tape to cover trim before applying polish,ect. with the pc. I have so far been careful enough,,but would like to get closer to edges without worrying about getting any on trim.

I know u can get easy release tape but was concerned about it leaving sticky residue behind,,if anyone has done this before ,,I would appreiate knowing what kind to get . Thanks in advance!!
 
I think it's a great idea to mask off trim and delicate areas prior to buffing. Wish I followed my own advice:(



Use 3M's tape. Their stuff is always good. A little residue won't hurt; just use a wax & grease remover and it'll come right off. Trust me, tape residue is nothing compared to wax in plastic trim.
 
Yes masking is a good idea and the 3M tape is a good product. Tip: remove the tape promptly after use, not overnight as it is harder to remove.
 
Definitely mask off any plastic, rubber and trim before doing any waxing and polishing. 15 to 20 minutes of taping saves hours of wax removal from plastic, rubber and other trim items. Don't skimp on price when it comes to masking tape...I use the 3M brand, it costs a little more, but it leaves little or no residue.



Another thing I do is cover the wheels before I start polishing and waxing. I take a standard 33 gallon size trash bag and make a slit in it, then drape it over the tire and wheel assembly. Any splatter from buffing ends up on the bag, not the tires and wheels!
 
<blockquote class='ipsBlockquote' >

<em class='bbc'>Originally posted by bretfraz [/i]
<strong class='bbc'>I think it's a great idea to mask off trim and delicate areas prior to buffing. Wish I followed my own advice:(

[/b]</blockquote>

ROTFLMAO. You and me both!
 
<blockquote class='ipsBlockquote' >

<em class='bbc'>Originally posted by bretfraz [/i]
<strong class='bbc'>I think it's a great idea to mask off trim and delicate areas prior to buffing. Wish I followed my own advice:(
[/b]</blockquote>
I kinda follow my advice. I masking tape the easy stuff and then say, "Screw it, and start waxing away"

Buy the expensive tape? I go to cheap way. Your going to be pulling it off pretty soon anyways so there won't be residue. 3 rols for $2 :xyxthumbs
 
I mask off my trim if I'm putting a coat of z-5 on or blitz. It takes such a little effort that its well worth it. The fender extensions on my truck seem to hold anything I get on them. z-5 leaves residue alomst as bad as blitz since the plastic is so coarse.
 
I have way to much to mask so I just take it easy near the trim.



As the Quick Bunny said Patience is a virtue.



Thank god for QD and a soft toothbrush though for those times I am in a hurry.



But seriously I just take it slow near the trim.
 
I know painters use a special blue masking tape that isn't as sticky as the regular stuff. I've seen it in most hardware stores but don't know about the price. I have used it on the job a few times and know it removes very easy.
 
the blue tape has a time limit on it before it gets a tad harder to remove, just make sure you follow the manufacturers directions.
 
Optimum Opti-Mitt 8 Inch Foam Wash Mitt

The New Optimum Opti-Mitt was designed by Optimum specifically for use with their No Rinse Wash & Shine. The high-density foam and waffle design remove dirt easily while holding the ideal amount of ONR to prevent marking and swirling.
Even though it was designed for ONR, it can be used with any car wash soap to wash any automobile. :drool5:

​
 
Better in some ways. They have excellent release properties unlike microfiber. They are incredibly soft like a finishing pad with about 90 ppi. And with the lanyard or by slipping your hand inside, there is far less chance of dropping it. I've been using two beta mitts for some time now and I really like them. I still use MF too but I like having a choice to wash safely with. It's a good size too...you don't see the missed spots like you do sometimes with smaller wash media or towels.
 
integritydetail said:
Better in some ways. They have excellent release properties unlike microfiber. They are incredibly soft like a finishing pad with about 90 ppi. And with the lanyard or by slipping your hand inside, there is far less chance of dropping it. I've been using two beta mitts for some time now and I really like them. I still use MF too but I like having a choice to wash safely with. It's a good size too...you don't see the missed spots like you do sometimes with smaller wash media or towels.
Click to expand...

I'm just curious because when I use a MF ( the dragon one sold @ PAC ), it's got a pretty large surface area for picking up the dirt, and the wash mitt looks like it has 1/2 of the surface area.
 
shizam1 said:
I'm just curious because when I use a MF ( the dragon one sold @ PAC ), it's got a pretty large surface area for picking up the dirt, and the wash mitt looks like it has 1/2 of the surface area.
Click to expand...


Ultimately I think it comes down to personal preference. I have used everything from lamb's wool to grout sponges with ONR but I like using MF towels the most, specifically our plush 'Magic Towel'. I like the way that I can get it into all the tight spaces such as under door handles, into body seams, etc.

I haven't tried the OptiMitt yet... but I am sure that Dr. G did a great job (as he always does) in researching the product and bringing it to market.
 
th0001 said:
Ultimately I think it comes down to personal preference. I have used everything from lamb's wool to grout sponges with ONR but I like using MF towels the most, specifically our plush 'Magic Towel'. I like the way that I can get it into all the tight spaces such as under door handles, into body seams, etc.

I haven't tried the OptiMitt yet... but I am sure that Dr. G did a great job (as he always does) in researching the product and bringing it to market.
Click to expand...

Yeah, I use the magic towel as well, and am very happy with it. I'll probably get one of these to try out anyway, especially for a regular wash it looks like it would be a good alternative to some of the other wash mitts.
 
You must log in or register to reply here.
Back
Top