Intense2jz
New member
just bought a silver subaru wrx. car has slight swirls. what products would you recommend? also car has black little pots i cant get off. what should i do? claybar? thank you.
Navigation
Install the app
How to install the app on iOS
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
More options
Style variation
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
ok im another noob at this...
- Thread starter Intense2jz
- Start date
White95Max
New member
If you don't have a PC, I wouldn't recommend you bother with the swirls yet. Some of my favorites for silver are:
AIO
WG
UPP
Paste Glaz
Nattys
All of those products are also very easy to use.
Those little black spots could be rail dust. Try a claybar...it will probably remove them pretty quickly.
AIO
WG
UPP
Paste Glaz
Nattys
All of those products are also very easy to use.
Those little black spots could be rail dust. Try a claybar...it will probably remove them pretty quickly.
Intense2jz
New member
so i cant remove light swirls by hand? i prefer to do it by hand because i left my pc at my other home.
White95Max
New member
You CAN, but it's a big PITA. If that's your only option, then I'd say wait until you can get your PC, or go ahead and polish by hand.
I'd use something like #80 or P21S Gloss Enhancing Paintwork Cleanser for that. I've had more bad experiences with hand polishing than good ones, so I tend to use my PC anywhere I can.
I'd use something like #80 or P21S Gloss Enhancing Paintwork Cleanser for that. I've had more bad experiences with hand polishing than good ones, so I tend to use my PC anywhere I can.
Intense2jz
New member
ok how does this sound? wash,clay,wash,mezerna fp applied with pc,then zaino wax to top it off? am i missing any steps?
Accumulator
Well-known member
That sounds good. I do think that the worst of the marring will require something stronger than the FPII. I used 3M PI-III MG on my silver WRX, but when I had anything worse than really light marring I got out the PI-III RC. I never used anything milder than the MG and that has a good bit more cut than FPII.