Newbie "Klasse Haze" question

FocusRun

New member
I have been reading about the infamous Klasse haze. I did experience it when I first Klass'd my car. I just wanted to ask if anyone found NEW tips and tricks to deal with it? (other than switching to Zaino)



So far from the previous posts, all I got is to use a dry applicator. Any additional info will be quite helpful.



Thanks guys!
 
Try searching the board - it has been discussed A LOT. I tested many techniques over 5 coats of SG, and here is the short version:



I recommend NOT using a dry applicator - I think it is impossible to spread the material around thinly this way. Apply by hand or PC with a foam pad; pre-lube a dry pad with a single spritz of non-carnauba detail spray such as Meguiars' Final Inspection.



When it comes to buffing out, showroom Lincoln's advice to me succeeded where many other things failed. 2 MF wipes, one in each hand. Wet one with water, wring it out as much as you can. Buff with it, follow immediately with the dry one.
 
Back
Top