New Megs hybrid ceramic wax.

10a63fe2297029593463d61f9ec42081.jpg


Frozen HCW beads when I left work.


Sent from my iPhone using Tapatalk
 
To my knowledge Dallas Paint Correction`s DPC Armor sealant has the highest concentration for a sealant at 10%. If you look at the MDS sheet for Gyeon Cure, SiO2 is listed at 5%. Strangely I think Car Pro Reload list 5% on the bottle but does not list SiO2 on the MDS Sheet, which I am sure the government will correct shortly as it has been brought to their attention. Scott at DPC says Armor can be cut in half with distilled water. That means that a $25 bottle of Armor at 5% is only $12.50.
 
kajunman said:
To my knowledge Dallas Paint Correction`s DPC Armor sealant has the highest concentration for a sealant at 10%. If you look at the MDS sheet for Gyeon Cure, SiO2 is listed at 5%. Strangely I think Car Pro Reload list 5% on the bottle but does not list SiO2 on the MDS Sheet, which I am sure the government will correct shortly as it has been brought to their attention. Scott at DPC says Armor can be cut in half with distilled water. That means that a $25 bottle of Armor at 5% is only $12.50.
Click to expand...

Shine supply Clutch is suppose to be 10%. No streak awesome “glow”. I made up some Merlin’s elixir with it and it’s the shiznitt! Disclaimer: never tried the mix with reload.


Sent from my iPhone using Tapatalk
 
acuRAS82 said:
PA sprays have in the 25% range, but I don’t know what it means.
Click to expand...

Coatings=crack said:
Just a question, been looking for polish angels spritz’s sio2 and tio2 content, do you know where you found that info? Couldn’t find a sds sheet.
Click to expand...

Would be curious to see as well. Having used Cosmic Spritz and High Gloss, they sure didn`t appear to be as potent as Gyeon CanCoat which has 15% SiO2 (claimed)...
 
This is from the msds sheat of PA Cosmic Spritz v3. It was changed in august 2018. Remember that it`s up to the percent so it can be be a lower volume.

Gefährliche Inhaltsstoffe
Lösungsmittelnaphtha (Erdöl), mittlere aliphatische <15 %
CAS 64742-88-7
EC 265-191-7
INDEX 649-405-00-X
STOT RE 1, H372 / Asp. Tox. 1, H304
Lösungsmittelnaphtha (Erdöl), leicht, aromatisch <1 %
CAS 64742-95-6
EC 265-199-0
INDEX 649-356-00-4
Asp. Tox. 1, H304 / Skin Irrit. 2, H315 / STOT RE 1, H372 / Acute
Tox. 4, H332
Titanium Dioxide <35 %
CAS 13463-67-7
Eye Irrit. 2, H319
Silicon Dioxide <35 %
CAS 231-545-4
Skin Irrit. 2, H315 / Eye Irrit. 2,


I think some Sio2 strings don`t need to be put in msds sheets. They even uses it in some foods the pure Sio2. And there are alot of strings of sio2. So you could miss that 2 products in the msds makes Sio2 on the paint. For a fun fact if you read Bead Maker msds you can see what could be in the fumes of fires if you have BM there. That`s right Sio2 LOL
 
Sorry that`s in german LOL. And if put in www polishangel dot net . You comes to a PA website that you can translate to english in the top of the page. Don`t have all of the PA products. And copy the cas number of the chemical and you can read more about it if you google that.
 
SWETM said:
Sorry that`s in german LOL. And if put in www polishangel dot net . You comes to a PA website that you can translate to english in the top of the page. Don`t have all of the PA products. And copy the cas number of the chemical and you can read more about it if you google that.
Click to expand...

Interesting, thanks for finding it. "Up to..." is quite an open ended statement.
 
BudgetPlan1 said:
Interesting, thanks for finding it. "Up to..." is quite an open ended statement.
Click to expand...

Yeah I know. But what I have talked to PA Sweden that developed Viking Shield it`s not far from that. They have their boosted Master Sealant version too. So think that they where straight with it about the Sio2 and Tio2 content. I copied and paste some information from them with the Sio2 in them. And I see know that they have gone up with Tio2 in the newer version of Cosmic Spritz. I also think you have a lot of the Sio2 wiped up from something like Cosmic Spritz. That it`s much residue that don`t bond enough. Would be interesting to test on a polished and panel preped panel. And apply a little heavier coat of Cosmic Spritz. Then let it sit until it`s a little hard to wipe it off or time it and do it just before. Useing a applicator sponge to apply it too. Carpro Reload they have been starting to recommend to spray on or wipe on a thicker/heavier coat of it. Which claims to have a longer longevity from that application than the useally 1-2 sprays per panel. And with Bead Makers first application method it makes more sense with the use of a covered application and let it to cross linking for some time. Then I think it`s other chemicals in a true coating. That uses chemicals so it bonds harder. And that would not be working with a spray on wipe off coating product. Cause you will be haveing high spots deluxe LOL. Just the Meguiars Hybrid Wax I think we see application problems because they where trying to make it more user friendly for the average Joe. With it`s to thick of getting through a water hydrophilic paint with water standing on it. And still you see youtubers apply it on the half of a car. Then wondering why it`s leaves streaks and high spots LOL. That`s the downside of the whole coating hype I think that the average Joe don`t read the description and apply it like any other wax or sealant product. There where many that had problems before Megs CHW when applying Hydro2 and Wet Coat and Hydro Blue wrong in all kind of ways. So many streaking problems where user errors. And that is hard to reduce with any coating product I think.

SiO2 Innehåll:
Quartz.MAX 5%
Moonlight 20 till 25 %
Sprayduster 10-15 % Titanium Dioxide upp till 12%
Presto upp till 25% Titanium Dioxide upp till 30%
Rapidwaxx upp till 30% Titanium Dioxide upp till 30%
High Gloss 5% Titanium Dioxide upp till 80%
Cosmic Spritz upp till 35% Titanium Dioxide 5-10 %
 
SWETM said:
Yeah I know. But what I have talked to PA Sweden that developed Viking Shield it`s not far from that. They have their boosted Master Sealant version too. So think that they where straight with it about the Sio2 and Tio2 content. I copied and paste some information from them with the Sio2 in them. And I see know that they have gone up with Tio2 in the newer version of Cosmic Spritz. I also think you have a lot of the Sio2 wiped up from something like Cosmic Spritz. That it`s much residue that don`t bond enough. Would be interesting to test on a polished and panel preped panel. And apply a little heavier coat of Cosmic Spritz. Then let it sit until it`s a little hard to wipe it off or time it and do it just before. Useing a applicator sponge to apply it too. Carpro Reload they have been starting to recommend to spray on or wipe on a thicker/heavier coat of it. Which claims to have a longer longevity from that application than the useally 1-2 sprays per panel. And with Bead Makers first application method it makes more sense with the use of a covered application and let it to cross linking for some time. Then I think it`s other chemicals in a true coating. That uses chemicals so it bonds harder. And that would not be working with a spray on wipe off coating product. Cause you will be haveing high spots deluxe LOL. Just the Meguiars Hybrid Wax I think we see application problems because they where trying to make it more user friendly for the average Joe. With it`s to thick of getting through a water hydrophilic paint with water standing on it. And still you see youtubers apply it on the half of a car. Then wondering why it`s leaves streaks and high spots LOL. That`s the downside of the whole coating hype I think that the average Joe don`t read the description and apply it like any other wax or sealant product. There where many that had problems before Megs CHW when applying Hydro2 and Wet Coat and Hydro Blue wrong in all kind of ways. So many streaking problems where user errors. And that is hard to reduce with any coating product I think.

SiO2 Innehåll:
Quartz.MAX 5%
Moonlight 20 till 25 %
Sprayduster 10-15 % Titanium Dioxide upp till 12%
Presto upp till 25% Titanium Dioxide upp till 30%
Rapidwaxx upp till 30% Titanium Dioxide upp till 30%
High Gloss 5% Titanium Dioxide upp till 80%
Cosmic Spritz upp till 35% Titanium Dioxide 5-10 %
Click to expand...

Wow up to 80% tio2 in high gloss. Anyone know if that much more shine than cosmic spritz?


Sent from my iPhone using Tapatalk
 
Just received my spray bottle ordered from Amazon for $14.00 with two day free shipping. Submitting digital $5 rebate request is a real PITA as they want a picture of your receipt :-(
Looking forward to using this spray on rinse off product. Have been using Griot`s Spray-on Wax as a rinse off product with mixed results; it tends to streak if not dried off with a microfiber towel.
 
392hemi said:
Saw a torture test posted online today comparing this Megs product with bead maker and Adam`s new spray coating

https://youtu.be/wQZgl8CR6o0
Click to expand...

I wonder if there were any surfactants left over from the APC that inhibited beading/sheeting of his tested product?. If not that was a bad showing for the Adams Spray Coating. If he would have washed them with Reset would some beading reappeared? Chemical resistance is normally where coatings stand out.
 
You must log in or register to reply here.
Back
Top