Need some guidance

S

slvr-bullet

New member
I had originally used Zaino on my car but haven't been keeping up with it for at least 1.5 - 2 years (yah yah I know I know). But I still use Z6 after every wash with Z7. I want to start fresh again using Zaino and wanted to know how I should approach it.



Should I strip it down with Dawn, then clay, wash w/Z7, then 3M swirl remover, then Z1, then Z2-pro or Z5 w/ZFX wait 24hrs and then apply another 2-3 coats of Z2-pro or Z5?



I will also being getting a PC. Can I use it with every step as mentioned above?
 
No need for Dawn with Zaino, as it really has very little, if any effect on it. So, just do a normal Z7 wash. Then...



1) Clay



2) Use swirl remover (this step will remove everything previously applied on the paint, including the Zaino)



3) Follow with Z polish: either Z1 or ZFX (your choice) and either Z2PRO or Z5 (again, your choice). With ZFX you can apply 3 coats back to back, no waiting 24 hrs. You can use Z6 in between each coat. If you have it, follow with Z8 for the ultimate Z finish.





The PC should really only be needed for the swirl remover. IMO, it is a waste to use with Zaino polishes. Although, it can be used with the Fusion swirl remover.
 
You must log in or register to reply here.
Back
Top