Need a swirl remover that's more aggressive than DACP

chu_singming

New member
Hey guys, I'm still trying to fight swirls on my black truck. DACP pretty much did nothing for them (applied with PC). I need a suggestion of a swirl remover that is more aggressive and that can be applied with a PC. I was thinking 3M Perfect it III but I wanted to get some suggestions first.



Thanks.
 
What pad and technique did you use with the DACP?



Much stronger than that and a rotary is in order.



I would suggest a yellow pad and the PC on 6 if you haven't tried it yet.
 
I don't think the regular PI-III RC ( pn 05933) would be much if any stronger than the DACP; it's pretty mild stuff when used by PC. Maybe the PI-III Extra Cut RC (pn 05936) but I dunno about using it with a PC instead of a rotary. Most aggressive products need a rotary's heat/speed to break them down properly.



The strongest thing *I* use by PC is 1Z's Ultra Polish.
 
Also, after you do it, you may have to go back and do it again. I agree with Accumulator, 1ZUP is a product which is a little more aggressive but can be used with a PC from what I have read.



Remember, sometimes you may have to live with some surface imperfections. You can round them out and fill them, but without rotary and a skilled technique, you may have to live with them.



The clear coat's integrity, especially with a daily driver is more important *for me* I would't go around more than a couple times with a strong polish, cutting pad, speed 6 and pressure.
 
I just want to knock down the swirls and the cloudiness a little bit. When I put the Klasse twins on it a few months ago, it looked great and very glossy until I looked at it in the sun, and it looked awful.
 
Try hitting it with a glaze like Vanilla Moose after DACP. Or try NXT after DACP. Top those with a wax like #16 or other carnuaba wax and you'll be happy



This will help knock down the swirls and definately the cloudiness.
 
Back
Top