Natty's Question

[TEGBOY]

I recently purchased a tub of the Natty's wax, I followed the directions, I used a damn foam applicator to apply it. My question is this, when I was trying to get the Natty's from the container, my foam sponge would bearly pick any of it up, its was all crumbly and wouldn't stick. Made it difficult to apply to the car.



Is this normal??



Thanks

 

[s2skimon]

I would not use a sponge, but rather a sponge applicator similar to this <http://store.yahoo.com/classic-motoring/jumapkit.html>



or cut a piece of dry MF towel

 

[MattZ28]

Take a yellow foam Meguiar's applicator, and cut it to size with a pair of scissors. As soon as you cut off the outer seam, you'll have 2 thinner applicators sandwiched together :xyxthumbs

 

[Big Leegr]

its was all crumbly and wouldn't stick. Made it difficult to apply to the car.



Is this normal??

It's not normal compared to my experience. I've used it warm (left in the car a while before getting to use it) and cool (I put it in the fridge to store it- hey, I spend more money on wax than food, so I might as well make use of the fridge!) and it seems to come off similar to S100- a firm cake that leaves a kind of greasy film on the applicator, and it goes on very easily, covering a fender with just a swipe or two.



It may not look like it's sticking to the applicator, but if you touch it, you'll likely feel some on it. Again, this wax spreads easily and goes on thin, so if you're used to "heavy" waxes, you may not think anything is going on the applicator.



Just my experiences with it. :nixweiss