My routine

B

bobross213

New member
Just wanted to know what u guys think about my routine, all done with a pc on speed 5-6



wash with dawn

clay

wash with MGC

1z pp on yello propel (light cut)

PB ssr1 blue propel (light polish)

AIO blue propel (light polish)

# 16 by hand (x2)



How does this sound for a moderatly swirrled/ scratched car, should i just up to the orange (heavy cut) for the PP or just go to IP on the yellow pad. And if i just up that should i put ssr1 on the green (Polish) pad for a little extra bite?



thanks in advance
 
First off :welcome to Autopia bobross213.

I would skip the Dawn wash.

You could clay while you wash, to save you some time. Just use the soapy car wash water as lube. Wash a panel, rinse it, throw a little more wash water on the panel and clay it. Then give the panel a final rinse.

Start with the least aggressive product and pad combo that you have. If that doesn't work I would use a more aggressive polish. If it still isn't working to remove the defects I would go to a more aggressive pad.

Don't forget to wash and dress the wheel wells. This will make a huge visual difference.:)

Good luck and let us know how it turns out.
 
You must log in or register to reply here.
Back
Top