More Cut?

The 1Z Pasta Intensiv has more cut by a pretty wide margin. Actually gotta be a little careful using it by hand as the initial bite can leave "tracer" style scratches.



Neither finish out ready-to-wax IMO.
 
Thnx Accum ! I'll be using a Flex RO with orange foam pads.

I have a badly marred Benz coming up this week. The 1Z is the strongest polish I have now.
 
cjbigcog said:
I'll be using a Flex RO with orange foam pads.

I have a badly marred Benz coming up this week. The 1Z is the strongest polish I have now.
Click to expand...



The 1Z Pasta Intensiv can do some serious work, I had to watch out that I didn't over-thin the clear on an Audi I did recently, and that was with the PC/3.5" PFW.



Don't work the 1Z at a high speed to start, it needs *low* speeds to work the abrasives before they break down; it's different from most products in that regard.



If you work the product slowly it'll do more correction, then you can turn it up and keep polishing, the broken-down product will give you a fairly decent gloss that won't require as much follow-up work (just a quick pass with something milder).
 
What would be low speed on a Flex? Even at the fastest setting, I don't think it turns very fast compared to a rotary.
 
cjbigcog said:
What would be low speed on a Flex?
Click to expand...



Beats me, I really dunno from Flex. But I've heard that it's more aggressive at a given speed than the PC, and I turn the PC down to ~4 with 1z stuff when doing serious correction (quite different from the "always use 6" advice I give/follow with other abrasives).
 
You must log in or register to reply here.
Back
Top