Mixing SIP with PO106FF?

Xcessiv

New member
Hey fellow detailers :bigups



I'm not quite satisfied with the cut of PO106FF, but I like the way it finishes. For a 1-step polish on a dark colored car, would adding some SIP to PO106FF slightly increase the cut while still giving a nice deep finish?



Or if I should stick to one single Menzerna product?



Thanks
 
If you mix the product 70/30 SIP/106fa you will have liquid that will perform on par (equal to) PO203s Power Finish.



However it would probably be better to buy Power Finish and not deal with the mess and head ache of trying to mix two toothpaste like polishes together.
 
TH0001 said:
If you mix the product 70/30 SIP/106fa you will have liquid that will perform on par (equal to) PO203s Power Finish.



However it would probably be better to buy Power Finish and not deal with the mess and head ache of trying to mix two toothpaste like polishes together.

I already have 64oz of each product, that's why I want to make the best use of them.



Excellent new!!! Have you tried it personally or if it's an assumption? Thanks for the info!
 
You would just be reducing the effects of the SIP by dilution since both are 'polishes'.



It's properties would remain proportionally to it's concentration.



BD
 
Xcessiv said:
Have you tried it personally or if it's an assumption? Thanks for the info!



Powerfinish is EXCELLENT! Use it with a White Polishing Pad or an Orange Medium Cut Pad or a Hydro Tech...depending on the color of the vehicle and the amount of damage. I've used it the past three days and I love the stuff. It has excellent work time as well. Very nice end results and very user friendly. Just get it and add to the collection. :xyxthumbs



Edit: On a dark colored car use it with a White Polishing Pad, a Green Light cut Pad, or a Tangerine Hydro Tech Pad. You may or may not need to follow up with a finer step ( I have found it varies but I don't need to in many cases).
 
Back
Top