Mixing and matching polishes and pads?

J

Johnnie27

New member
After reading thousands of posts here I haven't been able to pin point one answer I've been looking for.



I understand that you are supposed to use a cutting pad with cutting polish, a polishing pad with polish and a finishing pad with an LSP. However, I want to know if you are able to mix them up for different results. For example using PB's polishes...Can I use a heavy cutting pad with SSR1? Or can I use SSR2.5 with a finishing pad? Let's say I were to run out of SSR2.5 and need something more aggressive. Will using SSR1 with a heavy cutting pad and then use SSR1 with a polishing pad? Will I get the same results as I would've using the proper pads to match the polishes?



I think you get the idea.



Thanks,



J
 
You can use a less aggressive pad with a more aggressive product via PC, but not the other way around. The only real exception to this rule is a wool pad and light cut polish via rotary - it's great.
 
By using a less aggressive pad, will it reduce the polishing power of the actual polish. I.e. If I were to use SSR2.5 with a polishing pad and then use SSR1 with the same polishing pad, will I get different results?



J
 
You must log in or register to reply here.
Back
Top