Menzerna Polish on 4" LC pads

G

GS4_Fiend

New member
Product is P0203S, Menzerna Power Finish on 4 inch light cutting pad. Anyone have any suggestions before I use it on my black paint (clear coat)? What is your procedure on this?
 
Is it a black Lexus? I've only worked on one lexus which had minor swirls. They easily came out using IP and an orange 5.5 inch pad. Depending on the condition of the paint, you might try a polishing pad (white) or a green pad with power finish. I've never used power finish but it should have about the same cut as IP or slightly less than SIP.



I know there are people on this site that have plenty of experience with the couple different black lexus colors. Hopefully, someone else will chime in?
 
dublifecrisis said:
Is it a black Lexus? I've only worked on one lexus which had minor swirls. They easily came out using IP and an orange 5.5 inch pad. Depending on the condition of the paint, you might try a polishing pad (white) or a green pad with power finish. I've never used power finish but it should have about the same cut as IP or slightly less than SIP.



I know there are people on this site that have plenty of experience with the couple different black lexus colors. Hopefully, someone else will chime in?
Click to expand...



Yes, it's a black lexus with clear coat.
 
You must log in or register to reply here.
Back
Top