Meguiar’s No. 20 Polymer Sealant

[Scottwax]

Now this is the look that I want!:bow

I used Clearkote's Vanilla Moose and S100 Paste Wax on that Land Cruiser.

 

[2wheelsx2]

Good reflection. #20 is pretty good for that. However, like Scottwax's picture demonstrates, S100, or even #26 for that matter, will give you a wetter look. :up

 

[Scottwax]

Good reflection. #20 is pretty good for that. However, like Scottwax's picture demonstrates, S100, or even #26 for that matter, will give you a wetter look. :up

#20 topped with S100 would probably look very nice too.

 

[58fury]

i like the durability of #20, my pre winter application is as follows, wash with dawn, clay, #20 then i top with S100:xyxthumbs i also use #20 on my rims about once a month or so

 

[58fury]

that pic is from a show last year, i used 3M IHG that day by the way.

 

[Marty]

Can Meguiar’s No. 20 Polymer Sealant be layered?



How long do you have to wait between layers?



Should you apply it by hand or can you use a PC and foam pad?



Which foam pad with the PC would you use?

 

[Nagchampa]

Can Meguiar’s No. 20 Polymer Sealant be layered?



How long do you have to wait between layers?



Should you apply it by hand or can you use a PC and foam pad?



Which foam pad with the PC would you use?

Not recommended. The #20 has cleaning properties that would remove the previous layer.



You can use either technique



Use a soft finishing pad

 

[VetteToVair]

Can Meguiar’s No. 20 Polymer Sealant be layered?

i firmly believe it can be layered. i've always done it by hand, so i'm not sure if the pc pad would play a part in stripping the first layer. Increased durability and looks are my reasons for believing it can be layered.

 

[58fury]

nothing is as difficult as applying IHG by hand! as far as layering #20 i dont, but some people do, if anything you will insure a complete coverage of the car doing it twice.