megs 105

Z

zarko

New member
quick question

I will be using m105 with a flex da... that is the best speed to work the m105.. it seems to dry over right away at high speed... ex 6 ...... I will be using it with a white or orange pad...



thanks in advance
 
M105 likes slower speeds, if it's drying to fast some people put a thin line on the panel and the pad picks it up while you're polishing that section. I find for me it's best not even to spread it around before working it, that alone tends to dry it out almost immediately.
 
so what your saying is place a line on the panel.. Pick it up with the pad at a speed of lets say " 3.5-4 " and just work it in..... Is 3-4 a good speed to work 105 with ...
 
What works for me using 105 is, laying a line of product on the paint as stated above. Then I pick it up via pad on the rotary at speed one and immediately work into 1300-1500rpm. If the flex da is anything like the UDM(obviously flex is a tad more powerful) id say stick between 5-6
 
You must log in or register to reply here.
Back
Top