Mazda Mx5 British Green

RRacer

New member
Hi there



One more roadster , a Mazda Miata 1.6 110cv form 2000, moderated swirls and no scracths, ist almost a garage queen, it only goes out in the sun.



The left side was polished by an artist...it left an extra layer

of protection...white one :bigscream



As you can see its all not that bad...



DSC07784.JPG




DSC07788.JPG




DSC07789.JPG




The engine was pretty dirty.



DSC07792.JPG




DSC07794.JPG




Now the light that doesnt lie :lol



DSC07802.JPG




I did a test on the hood, after wahsing and claying it with Menzerna PG ( 2 times ), IP, FF, PWC e NAttys



DSC07815.JPG




DSC07816.JPG








Procedure:



Washing with sonax and full claying, wheels polished with IP and sealend with PB WS



Menzerna Pg,IP and FF, pwc and nattys



1z balsam , wheel weels with kunstoff and tires cleaned with apc , dressed with BnB



Lets go to the after, i did a 3 stage photoshoot, because i finished late and the sun light at 20:30 was really bad.



So, this is the 1 stage of photos.



DSC07820.JPG
 
DSC07828.JPG




The rear still maintains the sexy look miata has allround, after 5 years :)



DSC07832.JPG




DSC07840.JPG




DSC07849.JPG




The 2º stage, one more spot with the final sun light of the day



The engine receiving sunset light



DSC07851.JPG




DSC07853.JPG




DSC07856.JPG




DSC07857.JPG




DSC07864.JPG
 
Sunset by Miata :p



DSC07868.JPG




DSC07872.JPG




and more sunset... :)



DSC07874.JPG




DSC07877.JPG




DSC07880.JPG




DSC07887.JPG




The wet look was present in all photos, nattys really is something special



DSC07894.JPG




DSC07907.JPG
 
Now, the 3 stage of the photoshoot, one day after and by the owner.



Take a look



EPSN0001.JPG




EPSN0002.JPG




EPSN0003.JPG




EPSN0004.JPG




The Queluz Palace, at Sintra



EPSN0011.JPG




EPSN0013.JPG




EPSN0016.JPG




EPSN0019.JPG




EPSN0021.JPG




I hope ur liked, next week one more roadster...a red one :drool:



Akele abraço
 
Very nice. I like the results alot.

What did you use, a PC or Rotary ?

What was the selection of pads used and w/ what products ?
 
Axe said:
Good job, but I was looking forward to an AFTER 'light that doesn't lie shot' ?



Axe i did it in the sun, in direct sunlight :D

But if ur looking for swirls, 98% of them dissapeared...not 100%.



I used propel pads, pg with yellow pad, ip green pad and finished with ff and blue pad.





Akele abraço
 
I have done two Miata's this year and both were in pretty bad shape. It seems like Miata owners dont really take care of their cars. (Except Autopians Miata Owners ;) ) Good job on the Green Miata. You really made it glow!
 
wow nice job

i love BRG on any small roadster, seems fitting



so over there Miatas come in 1.6l? Here its 1.8
 
Back
Top