Lowered the Mustang PICS

97F1504x4

97F1504x4

New member
Well i finally got around to lowering the Mustang so i thought i would post them up here in the Modification Forum since there does not appear to be many topics in here.
17192.JPG

17188.JPG

17184.JPG

17191.JPG


Richard
 
Sweet ride man!! Lowering and rims makes those cars look amazing. I need to get my Mach 1 lowered here soon but can't decide which way to go...springs/shocks/struts or go with a coilover suspension?!
 
You should post the original pics when you only had the wheels on as a side-by-side comparison It looks 101% better.
 
jdoria said:
You should post the original pics when you only had the wheels on as a side-by-side comparison It looks 101% better.
Click to expand...

Ask and ye shall receive. I tried to get pictures in the same angles so here they are.

Before
15602.JPG


After
17192.JPG


Before
15609.JPG


After
17189.JPG


Before
15606.JPG


After
17184.JPG



Richard
 
Nice! Almost as wide as mine 315/35/20...:)

Looks friggin awesome! Foose design wheels really tend to keep you looking...
 
What is the setup that you installed?

I Just did my suspension in my 2000 GT Vert this past spring. Springs/Shocks/Struts/Subframes/Upper & Lower Control arms, and a complete Prothane urethane bushings kit!

Its absolutly amazing the difference over stock! Well worth every penny I spent!
 
RUBigDog05 said:
Sweet ride man!! Lowering and rims makes those cars look amazing. I need to get my Mach 1 lowered here soon but can't decide which way to go...springs/shocks/struts or go with a coilover suspension?!
Click to expand...


If you have any questions about parts ..please feel free to ask! Having done this and endless hours of research making sure that I was doing "the right thing" Ive pretty much become a Mustang suspension guru!
 
Much, much better. Makes you wonder why they come so high from the factory. My WRX is the same way. No lowering for me tho.
 
Focusedonsound said:
What is the setup that you installed?

I Just did my suspension in my 2000 GT Vert this past spring. Springs/Shocks/Struts/Subframes/Upper & Lower Control arms, and a complete Prothane urethane bushings kit!

Its absolutly amazing the difference over stock! Well worth every penny I spent!
Click to expand...

I went with the Eibach Pro Kit Springs, Tokico D-Spec Adjustable Shocks/Struts, BMR Panhard Bar and Upper Panhard Support. I will be getting the BMR lower control arms and upper control arm at some point later down the road.. along with a one piece aluminum driveshaft. I am waiting now for some underhood goodies. Power wise and dressup wise. Here is a picture of under the hood with a few of the recent mods i have done.

15927.JPG

15930.JPG


Custome Billet Badge

IMG_0922.jpg

IMG_0924.jpg


Richard

Richard
 
1st - Thank you for dropping your car 'correctly'. None of this cut spring garbage or just springs, no camber kit/shocks, etc.

2nd - WOW! That car looks amazing! Any plans further?
 
You must log in or register to reply here.
Back
Top