This is my plan on layering coats of SG on my car during the Summer. I am goign to start off with some AIO and apply a layer of SG and follow it up with Blitz wax. If in a few weeks I washed the car and stripped the wax with a clay bar could I just add another layer of SG then? Or should I add the layers all at once?
Layering SG
- Thread starter hellr
- Start date
2wheelsx2
New member
Don't add all the layers at once. You need at least 24 hours between coats of SG for best results (no scientific evidence, all testaments are anecdoctal).
What I would do is not top with wax until you are down with SG. Here is what I would do (and have done):
Day 1 - wash, clay, and polish. AIO, then 1xSG
Day 2 - QD if no rain and no dirt, otherwise wash. 1xSG
Keep repeating step 2 until you get all the layers you want, then wax.
What I would do is not top with wax until you are down with SG. Here is what I would do (and have done):
Day 1 - wash, clay, and polish. AIO, then 1xSG
Day 2 - QD if no rain and no dirt, otherwise wash. 1xSG
Keep repeating step 2 until you get all the layers you want, then wax.
I agree with them just get one layer of SG down the frist day and you are good protection wise. Then the next day apply another coat so on and so forth until you like the look. After you like the way the SG looks slap a coat of Blitz on there.
On a side note after 5 layers of SG you get diminishing returns on appearance gains. IMO
My two coats of wax.
On a side note after 5 layers of SG you get diminishing returns on appearance gains. IMO
My two coats of wax.