Klasse AIO Question

scottiem

New member
Well getting ready to do a full detail on the wife's '03 Expedition (red metallic) and have a few questions hope some of you can answer. After claying, I planned on using Klasse AIO, question I have is, paint is in great shape with only a few minor swirl marks will AIO take these out. After that I was going to layer it with P21S. I have a PC that I've been using with BF just need to get some new pads as mine are wearing out. Also what is a good quick detailer to use in between waxing. Any help and suggestions is greatly appreciated.
 
:welcome to Autopia



AIO is primarily a chemical cleaner with a little light abrasive in it. If the swirl marks are really minor, AIO should take most of them out. I've had good luck with it removing light buffer marks (hologramming) from a rotary polisher but I did have to work the AIO on the paint before I got the desired results. Try the AIO with a yellow polishing pad from Meguiar's or Lake Country.



If that doesn't cut it, you may need a paint polish like Meguiar's DACP or Einszett Paint Polish. Hard to say since we can't see the truck so experiment on a panel and see how things work for you.



Lots of good QD's out there. I've always like Eagle One WET wipe & shine for the price/performance ratio. Try a couple and find one you like.
 
Thanks for the warm welcome, I think the AIO should work fine as I only have some minor swirl in different spots. As far as the wax goes I'm thinking of going with P21S but have also heard that NXT is also good. Looking for opinions as to which one would give the best deep rich wet look on strawberry metallic. :usa
 
If ya gotta couple of 20's in your wallet, spin by WalMart and pick up a bottle of NXT (~$13), then stop by the local Harley Davidson dealer and grab a jar of S100 ($14.95), which is essentially the same as P21S but about half the price. Both offer a different look and perform differently but they're easy to use and are good values.
 
Back
Top