KLASSE...AIO or SEALANT and carnuba

[99MONGUSE]

I was going to order some KLASSE sealant, I have never used KLASSE products. I was going try the sealant with a good carnuba paste on top but I see KLASSE has an All in One too, is the AIO any good to use with a carnuba over it?

 

[redman69]

I tried KAIO and S100 last week. It looked great and was easy to apply.

 

[Dan]

AIO leaves a bit of protection behind. SG adds some depth and a very unique look. It is one of few sealants that you can tape up a panel and see a difference after you put it on.

 

[tom p.]

but I see KLASSE has an All in One too, is the AIO any good to use with a carnuba over it?

The KAIO is the base for their sealant. They're considered a "team", if I may.



Yes, following up with a coat of carnauba is typically very nice on that product

 

[Poordude]

I use kaio topped with col 476s. Wicked combo & i actually get better durability by using the kaio as a base with the 476.

 

[Accumulator]

Some sorta random thoughts follow:



When I use KSG, I *always* use a base of KAIO.



I don't top KSG with wax as it precludes adding more KSG later.



I only use KSG on vehicles I can get, *and keep* basically perfect, and I always use at least four layers.



If I'm using a wax, I'd *MUCH* rather use Autoglym SRP for my AIO product. SRP topped with wax is one of my very favorite approaches, it's even what I use on the Jag (and on cars spanning the gamut from my pal's Jag showcar to daily-driver beaters).

 

[imported_Ivan Rajic]

On my M3 I use 2-3 coats of Klasse Sealant Glaze during a spring detail, then top it off with P21S every 4-5 weeks. Before winter it gets 2-3 coats of KSG over a period of 2-4 weeks and that's it until Spring.