Just to be Sure

B

batson34

New member
Just got the PC 7336 $109 @ Lowes.



I read the how-to on the PC and I just wat to clairify. I work in the wax just to the point where it is at a thin haze THEN either buff out by hand or switch to a finishing pad.



Is it possible to go "all the way" with the same pad. Say for example I apply a wax with the finishing pas it ot possible to start & finish with the same one.



I am not trying to short-cut just understand.



Thanks.
 
It all depends on what wax/sealant your working with. The label should tell you the proper method. Once you figure out what your going to use, do a search here, i'm sure someone has already posted the proper application method for that product.

Once you use a pad for application you can not use it for removal, you'll just re-apply the product instead.

Normally i'll apply with my finishing pad and remove with a MF towel.
 
Waxes sealants can be applied by a finish pad. Removal can be done with a clean pad, like an orange pad and a MF bonnet or just do it by hand to remove.



The pads are great for applying a good coat of wax or sealant. Just go nice and s l o w when applying wax/sealant.



Regards,

Deanski
 
You must log in or register to reply here.
Back
Top