Just a quick question,,,,

M

Maligno

Quality not Quantity
Is there anyone here who does not use a rotory?? I'm having a heck of a time removing swirls with the pc and DACP on a orange LC pad. I here of many people doing it. Any help??

Mal
 
It depends on how bad they are and how hard your paint is if DACP will remove them. Have you noticed any improvement?

Here are some keys to how *I* use DACP. Start with a speed of about 3-4 to spread it around in a small area (about 2’ x 2’). Then bump the PC speed up to 5 or 6 and make very slow passes (SLOW is the key here) until the DACP virtually dusts away. You may have to do this 3 or 4 times. If you don’t notice an improvement then you might try a yellow cutting pad. If that doesn’t help you may need something more abrasive like SSR3. If you have really, really hard paint like a late model Audi then a Cyclo or rotary may be needed.

After using the harsher pads/polish you may need to go over it with a polish pad to remove any hazing that was created and also follow up with a milder polish like Meg’s #80 or SSR1.
 
A PC can accomplish quite a bit but you will need to use a more aggressive combo than you would with a rotary. I detailed a car about a month ago that had horrible swirls and between a cutting pad and Sonus SFX1 polish (most abrasive in the Sonus line), 99% of the swirls were removed. Had to follow up with a less abrasive combo to remove the hazing.
 
You must log in or register to reply here.
Back
Top