is my Foam cannon complete

[rjcastr]

i seem to be missing something as the nozzle slides off doesnt seem to connect am i doing it wrong?

 

[b2matt]

There should be a pin that goes through holes in the black nozzle, that holds the black nozzle onto the brass fitting. The pin might still be in the black nozzle, check it out, if so pull it out....attach the nozzle to the brass.....insert pin.....shoot foam

 

[rjcastr]

no pin nozzle but i noticed that my black hoze part just clips right in and secures is this perhaps a change in design?

 

[Greg Nichols]

NOT to be an A#$ but that is a foam GUN not a Cannon. These two often get confused.



Cheers,

GREG

 

[Nagz]

NOT to be an A#$ but that is a foam GUN not a Cannon. These two often get confused.



Cheers,

GREG

:chuckle: i was thinking the same thing

 

[BigAl3]

it looks like you got the foam gun that is set to 4 oz's per gallon, instead of the one with the brass pin meter where you have more variable dilution ratios (pictured below). i've never used the one you have pictured, only the ones with the brass pin meter so i can't comment on how yours will work...



Foamaster®

p.s. the black nozzle that attaches to the front should have a clip (like the one pictured above) that snaps on when you attach it and shouldn't come off unless you pull/take it off...



foam gun = attaches to garden hose

foam cannon/lance = attaches to pressure washer

 

[rjcastr]

no worries im new so i dont know much im trying to improve and learn ad i go along



hopfully my foam gun will work ok will try it on sunday

 

[kaotikdt]

I believe thats a Gilmour Foamaster Gun. Let me know how you like it. I might get one.

 

[Street5927]

I also have the one from Autogeek like BigAl pictured. I like the brass dilution ratio pin. It works very well.