Is Blackfire wet diamond acrylic?

I guess based on what Todd has said I would say BFWD is a Polymer sealant and not an acrylic sealant like Klasse SG.



I have questions though. Based on the Polymer vs Acrylic... Why do I get so much better protection from Acrylic sealants than Polymer's? And if Acrylic sealants offer better protection why are there not more of them?
 
TroyScherer said:
I guess based on what Todd has said I would say BFWD is a Polymer sealant and not an acrylic sealant like Klasse SG.



I have questions though. Based on the Polymer vs Acrylic... Why do I get so much better protection from Acrylic sealants than Polymer's? And if Acrylic sealants offer better protection why are there not more of them?
Click to expand...
I would like to know as well.
 
TroyScherer said:
I guess based on what Todd has said I would say BFWD is a Polymer sealant and not an acrylic sealant like Klasse SG.



I have questions though. Based on the Polymer vs Acrylic... Why do I get so much better protection from Acrylic sealants than Polymer's? And if Acrylic sealants offer better protection why are there not more of them?
Click to expand...

if acrylic sealants offer better protection, i'd like to know which companies offer them. i love blackfire but i'm all for more protection
 
There is only few I know of.

Klasse: HGSG (I know there is a German version called Carlack as well)
Werkstatt: Acrylic Jett
Chemical Guys: Factory Sealant, Blitz
Sonus Acrylic Glanz
 
Blackfire Wet Diamond is a fortified polymer Sealant, it has the latest German technology in it, has long as I know when I was at PAC.
 
TroyScherer said:
I guess based on what Todd has said I would say BFWD is a Polymer sealant and not an acrylic sealant like Klasse SG.



I have questions though. Based on the Polymer vs Acrylic... Why do I get so much better protection from Acrylic sealants than Polymer's? And if Acrylic sealants offer better protection why are there not more of them?
Click to expand...

I'm not sure I would agree that pure acrylics offer better protection. Again, based on memory, the original plan for Blackfire was to be a 100% acrylic sealant, but a lot of testing was done, and it was found by combining the different polymers it was possible to get better protection as well as the unique "Wet Diamond" look.

Are you finding more resistance to bug splatter and bird etchings with an acrylic?
 
Todd Helme said:
I'm not sure I would agree that pure acrylics offer better protection. Again, based on memory, the original plan for Blackfire was to be a 100% acrylic sealant, but a lot of testing was done, and it was found by combining the different polymers it was possible to get better protection as well as the unique "Wet Diamond" look.

Are you finding more resistance to bug splatter and bird etchings with an acrylic?
Click to expand...


I am finding that 2-3 coats of Klasse HGSG offer much more protection than other polymer based sealants. With KSG I have found bug splatter to clean of easily. But I don't have anything like the love bugs that are down south. As far a bird etchings go I find both sealant types to be fairly equal as bird dropping will etch any finish and protection if left on long enough.

IMO the biggest thing for me as far as protection is if a sealant can last through the tough winters we have. IME 2-3 coats of KSG will easily last me through the winter here in ohio and I usually have to strip it off in the spring to switch back to nubas. But polymer based sealant have only lasted me though half the winter at which point I have had to re-apply. This is the biggest test of durability IMO.
 
TroyScherer said:
I am finding that 2-3 coats of Klasse HGSG offer much more protection than other polymer based sealants. With KSG I have found bug splatter to clean of easily. But I don't have anything like the love bugs that are down south. As far a bird etchings go I find both sealant types to be fairly equal as bird dropping will etch any finish and protection if left on long enough.

IMO the biggest thing for me as far as protection is if a sealant can last through the tough winters we have. IME 2-3 coats of KSG will easily last me through the winter here in ohio and I usually have to strip it off in the spring to switch back to nubas. But polymer based sealant have only lasted me though half the winter at which point I have had to re-apply. This is the biggest test of durability IMO.
Click to expand...

Troy, I appreciate this information as I too live in Ohio. I am looking for something for my personal cars that will survive our winters and all of the salt and repeated washes. How hard is the Klasse HGSG to apply?
 
rudyjr said:
Troy, I appreciate this information as I too live in Ohio. I am looking for something for my personal cars that will survive our winters and all of the salt and repeated washes. How hard is the Klasse HGSG to apply?
Click to expand...

I have perfected my Klasse HGSG over time and now find it very easy to apply. This year I mixed KSG @ 1:3 (KSG:Water) This made the application even easier and allowed me to do multiple coats in a day. When using KSG straight I apply it as thin as possible (we're talking if you see a film its probably to thick). Let it cure for a few hours and then remove. I have found the longer you let it setup the easier it is to remove.
 
You must log in or register to reply here.
Back
Top