Hows this sound? Just somethin simple

I

imported_sal3291

New member
I am looking to remove a few lite swirl marks on my 99 Accord. The paint is in good shape besides the swirl marks. I do not have a machine just yet will be getting one in the next few months, so for now I was looking at

Washing the car

Clay bar Sonus SFX Ultra-Fine Detailing Clay

Wash car again

By hand use: (comes in a kit from autopia)

Sonus SFX-1 Restore Polish

Sonus SFX-3 Final Finish Polish

Do I need anything else after the SFX-3?
 
products sound fine, but I"m not sure how good your results will be done by hand. But give it a shot and post pics.. Good luck.
 
I think i'd wait to get the machine and remove the swirl marks. Also if it's just some light swirl marks you should be able to use sfx2 instead of sfx1 and finish with sfx3.
 
I always say use filler products for swirls if you intend on getting a machine to do 'proper' correction in the future. Filling them will probably look better than by 'hand', and be ALOT less effort. When you obtain your machine then you can take care of it properly of course.



A filler will last 2months or so, depending, and even if you had to apply and wipe off once a month its worth it until you grab your PC/UDM/Flex etc..
 
Jscort98 said:
I think i'd wait to get the machine and remove the swirl marks. Also if it's just some light swirl marks you should be able to use sfx2 instead of sfx1 and finish with sfx3.
Click to expand...



just agree...After sfx-3 you can apply a sealant or wax
 
You must log in or register to reply here.
Back
Top