how to apply pbs nattys blue wax??

[uadetailing]

hey guys just got my pc7224xp and its a kit with pbs products and it came with nattys blue wax in the jar and i want to use it on my pc how do i apply it to the gray finishing pad

 

[bigron62]

you need a special poorboys wax spreader ..

 

[RANDAL]

Funny RON!!!!! Maybe Steve could make some of those. Read the directions on the container. I think using a back and forth motion is what it says. NOT the swirl motion we are all used to.

 

[Beemerboy]

Nattys is a hand application not a PC app...I use a foam pad and do it in a circular motion, its hard to break old habits

 

[G.T.Subie]

Wax on, Wax off

Use your hansd brotha

 

[uadetailing]

oh ok so just rub the applicater pad in the paste and do it by hand ok dokie thanks

 

[G.T.Subie]

Go thin with it, you don't need much.

 

[uadetailing]

ok another question the paint on my escort is is bad shape i used pbs ssr2.5 and theres still swirls do i need to go to a diffrent pad liek the yellow pad??? all ive been using is the orange pad followed by a white with ssr1

 

[njcarting1]

ok another question the paint on my escort is is bad shape i used pbs ssr2.5 and theres still swirls do i need to go to a diffrent pad liek the yellow pad??? all ive been using is the orange pad followed by a white with ssr1

Use the ssr 3 or 2.5 with a orange pad then step down to ssr-2 with a white pad then ssr-1 with a blk pad. Then use a glaze bh-wd with blk or red pad. Then top with sealer or wax.
:surrender

 

[tmacsad]

Go thin with it, you don't need much.

+1 Very thin a little goes along way.

 

[Stephan]

+2 for a little goes a long way...plus there are directions on the back on the container...which I think state to have a damp applicator.

 

[southerndetail]

Open the jar and leave it on the roof, let gravity do the rest. All the good wax vapors will trickle out of the jar and down your paint, leaving it smooth and glossy.

 

[tmacsad]

Open the jar and leave it on the roof, let gravity do the rest. All the good wax vapors will trickle out of the jar and down your paint, leaving it smooth and glossy.

Gonna have to try that Southern D

 

[mcate]

I've actually tipped the jar over & rubbed it onto a blue pad on my PC before. Worked fine. Nowadays I just apply by hand with a MF pad.

 

[Ronkh]

Open the jar and leave it on the roof, let gravity do the rest. All the good wax vapors will trickle out of the jar and down your paint, leaving it smooth and glossy.

I've been doing it worng all these years.....

No wonder the cars I do look terrible. :wall :lol2: