How long after S100 before Final Detail?

I

imported_Faceman

New member
Hi,



Just put on and buffed off a coat of s100 on my car. How long should I now wait before I use Final Detail?



Also, will Final Detail stop another coat of S100 "bonding"?



Thanks,



Face
 
You should be able to use FD right after S100 with no issues.



Also, will Final Detail stop another coat of S100 "bonding"?
Click to expand...



S100 is not a sealant but a carnuaba wax. No bonding issues whatsoever.
 
Great stuff!



I just wondered if there was something in the FD, like silicone or whatever, which would cause problems for the S100.



Thanks for the info,



Face
 
FD on top of S100 is sweeeeeet



FD on top of anything I have ever tried is sweet, too bad my FD Is a solid block of ice right now



Im jonesin for some warm weather just hearing these questions
 
Faceman said:
Just put on and buffed off a coat of s100 on my car. How long should I now wait before I use Final Detail?



Also, will Final Detail stop another coat of S100 "bonding"?
Click to expand...



Same application session for me it works great. I usually wash once before applying a second coat of wax with a detail spray over the first coat of wax. I'm not sure that this is necessary. I'll bet Meguiar's would tell you this is O.K. if you were using their carnauba's. In fact I've been told by their reps that FD is a great way to moisten your wax/buffer pad. That would lead me to believe it isn't a problem.
 
Questions,



Do you guys use that grey sponge that came in with the S1000 and P21S Carnuba wax? or you guys use something else?
 
i use it. it spreads the product pretty well but i might start using the yellow meguiars foam applicators because the grey one is getting a little "hard".
 
Do you guys use that grey sponge that came in with the S1000 and P21S Carnuba wax?
Click to expand...



I use it all the time. I find its alittle smaller than the yellow apps and allows me to get into small spaces easier.
 
I don't use the grey sponge. I actually take a plastic knife and spread it on a Meguair's buffer sponge and apply it with my PC. I know that many wouldn't do this but I put just about anything I can on with a PC, using one just turns my crank. :p
 
Been told by a few wax makers that it's better to let the wax cure

for a day or two before a QD as you will be removing a certain percentage of the wax you just applied.
 
I'll apply it with that little grey applicator, remove with an MF , but what I've tried lately and it has worked is after I'm completely done, take my MF bonnet on my PC and go over it.. heats it up for a really shiny wetter looking fininsh IMO
 
You must log in or register to reply here.
Back
Top