How do you clean your BFMS applicator?
- Thread starter Chinaski
- Start date
. 10 minutes after and my eyes still haven't adjusted to normal light. I think i'll try the "bounce the light off the ceiling" method when I use it 
imported_brumma
New member
Do you guys/gals bother to clean the yellow applicator that comes with the Fire & Ice kit? If so, what do you use? I tried some Griot's Microfiber and Foam Pad cleaner and it doesn't seem to cut it.
imported_gewb
New member
I soak it in 70% alcohol for about 30 seconds, then "work" it with my fingers for a minute, sqweeze it out and repeat (with fresh alcohol) then let dry.
Regards,
GEWB
imported_glfahlc
New member
i've using meguiars super degreaser. spray it on and work loose with my thumbs a bit then wash out with water and air dry.
Nth Degree
New member
+1 on the alcohol. I use a little dawn first to get the bulk out, then move on the the 70%.
imported_brumma
New member
Do you wash 'em every time?
SIDetailing
New member
Wash them after every use.
Nth Degree
New member
YES! Always wash your applicators after every use. Especially those for wax. Once the wax dries it will become next to impossible to completely remove.
bmw5541
New member
Always wash them after every use. However, you need to know that you will never get the BFWD out of your applicator completely.
imported_brumma
New member
I tried the combination of Dawn followed by alcohol and that seems to have done the trick. Thanks fellas!
imported_jlineman
New member
Why is that and not with other polish and sealants?