help

Buff Guys Auto

Buff Guys Auto

New member
hey guys im having a time with my final swirl removal process when compounding.I have a dewalt 849s ive been using 3m compound and wool pad then (3m perfect-it plus foam compounding pad with a lmed cut swirl remover from auto majic im sure its not the best but it works) after that im running in a delema ive been a glazing pad but with a bannana liquid wax with a very light cut at it looks great, however; i want to put a sealant down directly the the paint instead of it laying on top of a middle of the road wax which is undoubtedly severely decreasing life span of protection, and shine of finished product......(The question) i was thinking of using my sealant as my final swirl removal product perhaps some klasse all in one. WILL IT DO THE JOB WELL<IF NOT... WHAT WILL?
 
hey guys im having a time with my final swirl removal process when compounding.I have a dewalt 849s ive been using 3m compound and wool pad then (3m perfect-it plus foam compounding pad with a lmed cut swirl remover from auto majic im sure its not the best but it works)



after that im running in a delema ive been a glazing pad but with a bannana liquid wax with a very light cut at it looks great, however; i want to put a sealant down directly the the paint instead of it laying on top of a middle of the road wax which is undoubtedly severely decreasing life span of protection, and shine of finished product......(The question) i was thinking of using my sealant as my final swirl removal product perhaps some klasse all in one. WILL IT DO THE JOB WELL<IF NOT... WHAT WILL?



Cleaned it up for you, font is terrible.



You need to step down to milder pad and polish. With a little reading on here you can find some products that will work. Check out the machine section.



Klasse AIO has no cut or protection.
 
Thanks, salty ;)



Buff Guys Auto- As noted, you need to get a medium strength abrasive polish to use right before the sealant. I'd go with Menzerna PO85RD myself, but there are others that'll also work.



You could try Zaino AIO (which does have some cut) but I doubt it'll be sufficiently abrasive.
 
As the others have accurrately stated, you need to add a finer polishing step in there.



And with a bit of liberty taken, might I suggest you apply the LSP by hand?
 
hey guys thanks a lot for your help ive tried some menzerna final polish works fantastic. btw how do you guys feel about collinite? for clear coat app, as well as gel coat>
 
You must log in or register to reply here.
Back
Top