Help with my PC DA

[Fallz]

ok my pads are getting shot and I need to replenish my supply of pads.



First off my PC is a 7224 . It came with a 5.75 backing velcro plate. I have been using Megs pads that are I would guess 6.5 with a 5" velcro area.



I would like advice from if I should get a new backing plate/size (anything new / better out there) or is this one just fine ?? Work's ok. No problems.



I would like advice on pads . Just the 2 basically . Finish&Polish. I'll probably get about 20 total.

 

[Legacy]

Get a 5" backing plate with 5.5" pads and maybe some 4" pads with backing plate, for more correction. LC orange, white, gray and blue should be enough. You will see a big difference with the smaller pads. Good Luck

 

[imported_Luster1]

Get a 5" backing plate with 5.5" pads and maybe some 4" pads with backing plate, for more correction. LC orange, white, gray and blue should be enough. You will see a big difference with the smaller pads. Good Luck

I completely agree. The 5.5" pads are my favorite.:bow