Help..hurry please,,Z1 Z2 Z6

[AsphaltAnihil8r]

Thanks for any help,,I just put Z1 on the car ,left it on and applied Z2 and let it dry,,I was told to use Z6 to remove the Z1 & Z2,,my problem is --It seems easier to remoe the Z1 &Z2 with a DRY cotton towel,,do I have to use the Z6



Please help



Dennis

 

[MikeLS]

There's no need to use Z6 to actually remove Zaino. If the Zaino is completely dried, it should buff off almost effortlessly with a good quality "dry" 100% cotton towel. It IS a good idea though to use Z6 after you remove the Zaino to add gloss and slickness.



:xyxthumbs

 

[AsphaltAnihil8r]

Mike,thaks for the fast responce ,I did see this earlier and followed your advice



Worked out great

Now can i layer the Z2

 

[imported_nihoole]

you can layer 1 coat at a time and remove, Z6 and apply up to three coats.If you are not using ZFX then you can wash Z6 and 1 coat of Z2-Z5 and remove 24 hours after your first coat was removed.You can only put one coat on every 24 hours if you do not use the ZFX.Take care hope you like it:up