HD Poxy reaction with clear bra material edges

K

kajunman

New member
Quote: Originally Posted by Slickery



Now for the bad...



I haven't had much issues with HD Poxy around moldings, but I have had problems with the plastic strips that dealers are putting on cars these days to avoid chips. The thin strips pull the HD Poxy out of the applicator and stain the edge just as shown in the picture. This occurred on every one of these strips I've used with HD Poxy.



I presume that the HD Poxy would cause the same problem on the edges of 3M like clear bra material. Has anyone else experienced this problem? Maybe someone from 3D would care to comment on this problem?



Thanks,

Kajunman
 
I haven't used Poxy yet but isn't this the same with any liquid sealant? If you run your applicator over the edge of a clear bra some of the product will build up on the edge. If the product is at all finicky re: removal, it will be a pain to remove. So...don't run the applicator over the leading edge of the clear film?
 
Picus said:
I haven't used Poxy yet but isn't this the same with any liquid sealant? If you run your applicator over the edge of a clear bra some of the product will build up on the edge. If the product is at all finicky re: removal, it will be a pain to remove. So...don't run the applicator over the leading edge of the clear film?
Click to expand...



I have used alot of sealants and never had the problem with staining not buildup as mention by Slickery.



Kajunman
 
just a thought, put tape about a 1/4" over the edge of the bra, then when you're done remove tape.
 
Run too much product over the edge, thats what happens. Running the pad along the edge lightly with minimal product should help alleviate the problem.
 
kajunman said:
I have used alot of sealants and never had the problem with staining not buildup as mention by Slickery.



Kajunman
Click to expand...



HD Poxy is amazing product. A little goes along-way. Unlike other products you need very little to make great effect.
 
kajunman said:
I have used alot of sealants and never had the problem with staining not buildup as mention by Slickery.



Kajunman
Click to expand...



Ya sorry, I am probably confused about what you're asking. I've never seen a sealant "stain" a clear film, I've seen buildup when improperly applied. Is there any chance the film he was working with had lifted the the poxy got underneath it? I do see what appears to be staining when a film lifts and dirt/wax/sealant get under it. Otherwise I must be completely out of my depth, because it seems life if a product was going to stain the edge of a film it'd stain the entire thing.
 
Nevermind. I just read the other thread. That's build up in a film edge, it is user error not product error. Don't use so much product/don't rub applicator over edge/remove properly and it will not happen.
 
kajunman said:
I have used alot of sealants and never had the problem with staining not buildup as mention by Slickery.



Kajunman
Click to expand...

016yv.jpg




Stop blaming the product. This is NOT staining. This is product buildup from overapplication and improper removal. Detailing 101 > chapter 1 > How to apply & remove synthetic sealants.
 
You must log in or register to reply here.
Back
Top