Owner of this had visited some family in Aberdeen and tried to book her car in with Polished Bliss whilst there but they was fully booked so they kindly passed on my details so must say a big thanks to them for the referral:thumb:
This was done over 2 day and Process/Products used:
WHEELS/TYRES
- Wheels cleaned with Epsuma Revolution Wheel cleaner
- Tyres cleaned with Megs Super Degreaser
- Tyres dressed with Zaino Z16
- Wheels sealed with Zaino AIO and Zaino CS
WASH
- Foam with AG Powermax 3
- Washed with Megs Shampoo Plus and a lambswool washmit
- Clayed using Sonus Green
PAINT CORRECTION
- Gloss It Evolution Cut on a Megs Polishing Pad
- Refined with Swissvax Cleaner Fluid Pro on a 3M Finishing Pad
PROTECTION
- Swissvax Divine
Engine bay in need of a good clean, this was done with a Citrus Degreaser....
then dressed with Aerospace 303.
Rear Focus badge removed with some dental floss and a heat gun. Remaining adhesive removed with Tardis
50/50
BEFORE
AFTER
BEFORE
AFTER
BEFORE
AFTER
BEFORE
AFTER
BEFORE
AFTER
BEFORE
AFTER
Few scratch's on bonnet required wetsanding, this was done with 3000 unigrit.
BEFORE
AFTER
Client requested brake calipers to be painted. Wheels were removed and calipers were cleaned/degreased with Bilt hamber Surfex HD and brake cleaner. Each caliper recieved 3 coats and this was with the aid of a heat gun to speed up drying between each coat. Whilst wheels were off inners were treated to Zaino AIO and Zaino CS
BEFORE
They could of done being a slightly darker colour of blue IMO but still looks good:thumb:
Some afters
THANKS FOR LOOKING:thumb:
This was done over 2 day and Process/Products used:
WHEELS/TYRES
- Wheels cleaned with Epsuma Revolution Wheel cleaner
- Tyres cleaned with Megs Super Degreaser
- Tyres dressed with Zaino Z16
- Wheels sealed with Zaino AIO and Zaino CS
WASH
- Foam with AG Powermax 3
- Washed with Megs Shampoo Plus and a lambswool washmit
- Clayed using Sonus Green
PAINT CORRECTION
- Gloss It Evolution Cut on a Megs Polishing Pad
- Refined with Swissvax Cleaner Fluid Pro on a 3M Finishing Pad
PROTECTION
- Swissvax Divine
Engine bay in need of a good clean, this was done with a Citrus Degreaser....
then dressed with Aerospace 303.
Rear Focus badge removed with some dental floss and a heat gun. Remaining adhesive removed with Tardis
50/50
BEFORE
AFTER
BEFORE
AFTER
BEFORE
AFTER
BEFORE
AFTER
BEFORE
AFTER
BEFORE
AFTER
Few scratch's on bonnet required wetsanding, this was done with 3000 unigrit.
BEFORE
AFTER
Client requested brake calipers to be painted. Wheels were removed and calipers were cleaned/degreased with Bilt hamber Surfex HD and brake cleaner. Each caliper recieved 3 coats and this was with the aid of a heat gun to speed up drying between each coat. Whilst wheels were off inners were treated to Zaino AIO and Zaino CS
BEFORE
They could of done being a slightly darker colour of blue IMO but still looks good:thumb:
Some afters
THANKS FOR LOOKING:thumb:
:notworthy:
