Ghetto garage for detailing, best i could do with little to no money

Coupe sometimes you make me wonder. Having been part of the Z-24 sceen for the past 10 years or so trust me when I say there are just **** load tons of parts out there for the Grand-ams. Because when GM performance comes out with new stuff (the 3400 is probably the most supported V6 engine in GM's entire line up.) we have to find some way to emulate it.



As far as body kits go should you want that

FX-designs

Diza Racing

Razzi

Onderground performance

Bomex

All have many kits available for the GA's



If you know anything at all about engine building and perfromance you can very easily go to GMperformance and pick a slew of cams cranks and rebuild kits. We have people dropping the 3400 into their Z-24's on a daily basis putting anywhere from 220-well over 400 HP using nothing but off the shelf stuff from GM themselves.



If you can't find the stuff make that GA of your just a monster machine it's because you just arn't looking hard enough. because there are a lot of support companines out there.



If you really need it PM me and I'll send you a crap load of links to just about anything you could need.
 
Coupe, nice garage after painting and shelving. What I would add first is new electrical service box, at least 100 amps. Run electric to new outlets and where you want your lights, put lights in the corners where the ceiling and wall meet, if the lighting is of the plug in type just use regular wall plug ins as for a house with box and cover. you wont need outlets every 2 feet but 4 feet will be close enough, plus the up high for your lights. Insulate and line the ceiling, mine is of the chip board type. Paint the ceiling white whatever you use. Next install would be water service but even I dont have that at home yet, I have hot and cold on the side of the house 20 feet away and have washed cars below freezing. Dont use gas in the garage!!! Electrical heaters are safer and more effective, instant heat! Just make sure you have area to install and move them around the vehicle where youy need them. RANDAL
 
Jakerooni said:
Coupe sometimes you make me wonder. Having been part of the Z-24 sceen for the past 10 years or so trust me when I say there are just **** load tons of parts out there for the Grand-ams. Because when GM performance comes out with new stuff (the 3400 is probably the most supported V6 engine in GM's entire line up.) we have to find some way to emulate it.



As far as body kits go should you want that

FX-designs

Diza Racing

Razzi

Onderground performance

Bomex

All have many kits available for the GA's



If you know anything at all about engine building and perfromance you can very easily go to GMperformance and pick a slew of cams cranks and rebuild kits. We have people dropping the 3400 into their Z-24's on a daily basis putting anywhere from 220-well over 400 HP using nothing but off the shelf stuff from GM themselves.



If you can't find the stuff make that GA of your just a monster machine it's because you just arn't looking hard enough. because there are a lot of support companines out there.



If you really need it PM me and I'll send you a crap load of links to just about anything you could need.
Click to expand...





Find me links then, dont just name off company's.



Im a mod of the biggest N-body site on the net, i know what is out there and what isnt.



Milzy Motorsports and 60degreeV6 are the ONLY ones who make anything performance raleted to these engines period and we are talkin HUGE money, far more than what its worth.



Diza does NOT make body kits for us



Onderground performance NOT make body kits for us



Bomex does NOT make body kits for us



You also might wanna consider im close to Zoom and the whole W-body crowd, you cannot school me on a vehicle ive been heavily involed with for 7 years.
 
Coupe said:
Find me links then, dont just name off company's.



Im a mod of the biggest N-body site on the net, i know what is out there and what isnt.



Milzy Motorsports and 60degreeV6 are the ONLY ones who make anything performance raleted to these engines period and we are talkin HUGE money, far more than what its worth.



Diza does NOT make body kits for us



Onderground performance NOT make body kits for us



Bomex does NOT make body kits for us



You also might wanna consider im close to Zoom and the whole W-body crowd, you cannot school me on a vehicle ive been heavily involed with for 7 years.
Click to expand...



Even in the W-body crowd the 3400 doesn't have much of anything supporting that engine. Not sure what that guy is talking about. But if you do have any links I would like to see them so I can pass them along to the 3400 guys.



RSM of Canada used to have a supercharger kit for the 3400 but they no longer exist.
 
Looking great coupe. You're lucky you have space for detailing i have a 2 door but its filled to the nine with household stuff. i can only fit my car in and it's an adventure just to wax my car in my garage.
 
Looks better than what I have to work with. (25' x 25' carport.. dirt floor, not closed in.) Trying to decide what I want to do with it now without spending a bunch of money
 
You must log in or register to reply here.
Back
Top