Carbon Blue
New member
Now this was definitely an extensive detail! The owner from clubrsx.com (Silver DC5 TypeS) dropped the car off overnight and upon arrival the car was somewhat clean but it still had its fair share of swirl marks due to it never being polished in its entire 6 years. The owner contacted me prior to wheel installation because he wanted his new rims sealed so that it would be protected from the daily elements and brake dust. Though people say black cars are the hardest to clean Id definitely say that lighter colored cars are harder to improve upon to make a noticeable difference. I took around 400+ pics because trying to capture the imperfections in the paint were so diffucult. The car received the entire exterior and interior treatment. Enjoy!
Exterior Products Used from what I remember
SIP
PO85RD
WG
Z18
S100
ZQD
Too hot!
Owner requested me to seal his new rims
Grimey
After claybarring the passenger door
Mild swirling and marring
Prepping the beast
More prepping
Another beast in the driveway waiting for a detail
Driver side hood: Left side 1st stage polish, Right side uncorrected
Both sides corrected
Passenger hood- Right side corrected, Left side Uncorrected
Passenger hood- Both sides corrected
Driver door- According to the owner his nephew dragged his hands on the door while the car was dirty
And left swirling. (lower right hand corner)
Swirls removed
Ghosting clearcoat due to debadging the RSX emblem
Ghosting removed
Etching from bird droppings and swirl marks everywhere
Swirls removed along with the etching
Hazing/swirled clearcoat=bad reflection
1st stage polishing= a much more clear light reflection
Passenger door: After 1st stage polish
Left side corrected, Right side uncorrected
Left side corrected, Right side uncorrected= Notice how the reflection on the left side is much more clear
Interior after a full recondition/shampoo
Headliner- Driver side cleaned, Passenger side not cleaned
Floor mats after a shampoo
Dirty exhaust
After a mild polish job
The final product
Looking good
Exterior Products Used from what I remember
SIP
PO85RD
WG
Z18
S100
ZQD

Too hot!

Owner requested me to seal his new rims

Grimey

After claybarring the passenger door

Mild swirling and marring

Prepping the beast

More prepping

Another beast in the driveway waiting for a detail

Driver side hood: Left side 1st stage polish, Right side uncorrected

Both sides corrected

Passenger hood- Right side corrected, Left side Uncorrected

Passenger hood- Both sides corrected

Driver door- According to the owner his nephew dragged his hands on the door while the car was dirty
And left swirling. (lower right hand corner)

Swirls removed

Ghosting clearcoat due to debadging the RSX emblem

Ghosting removed

Etching from bird droppings and swirl marks everywhere

Swirls removed along with the etching

Hazing/swirled clearcoat=bad reflection

1st stage polishing= a much more clear light reflection

Passenger door: After 1st stage polish

Left side corrected, Right side uncorrected

Left side corrected, Right side uncorrected= Notice how the reflection on the left side is much more clear

Interior after a full recondition/shampoo

Headliner- Driver side cleaned, Passenger side not cleaned

Floor mats after a shampoo

Dirty exhaust

After a mild polish job

The final product

Looking good