First C&B '03 Escape BAD shape!!

RToth

New member
This is the 10th detail I have done so far, and I finally feel comfortable enough to post up here for you guys to see my results. I am currently only doing exterior jobs untill I get some good interior hardware, so this also was exterior only. I have been learning so much doing this and this job was no exception. Every one of my jobs so far has been better then the last, and figuring that would happen, I did my cars first and they even turned out good.





This is a 2003 Ford Escape, 50,000 miles! This looked worse then the 2003 Bonneville I bought last year with 125,000 miles on it:soscared:



I tried SIP with an LC CCS orange pad and it just didn't cut it. I didn't have anything else, and I didn't have the time to order something online and wait for shipping. SO, I picked up some Meguiar's #4 locally. Not sure what anyone thinks of it, but it is all I could find quickly and it worked good.







Two bucket wash with Meg's Gold Class car wash and grout sponge

Mothers clay bar

Meg's #4 with orange Wolfgang & UDM

SIP with LC CCS orange pad & UDM

Menzerna Micro Polish with LC CCS white pad & UDM

IPA wipedown

Meg's # 21 V 2.0 with LC CCS black pad, removed with LC CCS blue pad



Wheels and tires

cleaned with DP gel wheel cleaner

Meg's Gold Class Endurance tire shine

rims got treated with Meg's #21





Looking for constructive criticism and comments. I know the wheel wells need more work, but that is as good as I could get them with only the car wash soap and no dressing.



I want to know what you vets think of a noobs detail job:cooleek:



BEFORE

P1020291.jpg




AFTER

P1020313.jpg




BEFORE

P1020290.jpg




AFTER

P1020305.jpg




BEFORE



P1020294.jpg


P1020292.jpg


P1020293.jpg




AFTER



P1020296.jpg


P1020297.jpg


P1020298.jpg


P1020299.jpg


P1020301.jpg


P1020302.jpg


P1020303.jpg


P1020304.jpg


P1020306.jpg


P1020307.jpg


P1020314.jpg


P1020316.jpg


P1020319.jpg


P1020318.jpg
 
Thanks a lot guys! I have been learning and doing a ton of research on here and AG. I try to get results at least somewhat close to what many of you guys achieve, so when you come in here and leave comments like that, it really means a lot to me:bounce
 
*B2* from PBC. So you guys hang out over here too, huh? Another deserved pat on the back for your work there Ryan. Eric, where in Illinois are you? I am in Alton, near St. Louis, and could take care of you if you wanted.
 
*B2* from PBC. So you guys hang out over here too, huh? Another deserved pat on the back for your work there Ryan. Eric, where in Illinois are you? I am in Alton, near St. Louis, and could take care of you if you wanted.
Bout 48-50 miles north of Chicago. BTW, Check your PM's Stanger. Yeah, I hang out here.. Trying to learn the good stuff and the ins and outs of detailing. :)
 
Back
Top