EX by rotary? and other questions

[dtailthis2]

Should you apply sealants like ex and ex-p with a rotary?

Is the SSR line good for scratch removal with a rotary?

What speeds should SSR3 be applied with using a rotary?

If you use ex and exp with a rotary what speeds?


What edge pads for each?

more questions to come.

 

[Poorboy]

Should you apply sealants like ex and ex-p with a rotary?

no

Is the SSR line good for scratch removal with a rotary?

yes

What speeds should SSR3 be applied with using a rotary?

1800-2400

If you use ex and exp with a rotary what speeds?

don't ..use a pc or hand


What edge pads for each?

polishing pads for SSR's , light cut if really bad followed by polishing pad...polishing or finishing pads for EX/EX-P

more questions to come.

 

[dtailthis2]

so after i do a car with ssr3 or ssr2, i should follow up with ssr1, then pwc with rotary, then seal by hand?


i assume polishing or finishing pad for pwc?

 

[Poorboy]

if you have the time..absolutely SSR1 will enhance the shine...pwc by pc or hand or very low speed with finishing pad on a rotary...