dust problem

P

pampos

New member
Hi again.I hope you have not been tired by my questions :) . Ι want to try for first time the UPGP.As i read in the user's guide i have to wait 6 to 12 hours to dry before buffing it away.What happens if dust come over the car during this time?Unfortunately i don't have a fully closed garage and the dust is everywhere.
 
Macruz19 said:
Wash the car, but sometimes if it's light dust. You can get by with a QD.
Click to expand...

you mean to wash the car before buffing the glaze??water and drying towel will not remove it?or i will have the same results if i buff it or if wash it?
 
I don't think you have to buff it off. Its a wipe on walk away product. I have used it on 5 cars so far and twice twice on my own cars. You just put it on and then leave it. The 12 hours thing is to re-apply if you want more coats. The first couple of cars I applied too thick in some areas, thats where you wait the 6-12 hours I think to buff off I think, but if you don't apply too thick you should be fine.
 
MobileJay said:
I don't think you have to buff it off. Its a wipe on walk away product. I have used it on 5 cars so far and twice twice on my own cars. You just put it on and then leave it. The 12 hours thing is to re-apply if you want more coats. The first couple of cars I applied too thick in some areas, thats where you wait the 6-12 hours I think to buff off I think, but if you don't apply too thick you should be fine.
Click to expand...

Agreed, it's a wowo sealant. No need to wipe off. Wait 12hrs. and wash or QD and reapply if you wish.
 
that was really helpful.if i want to apply another layer i have to wait again 6 to 12 hours and then wipe it?
 
pampos said:
that was really helpful.if i want to apply another layer i have to wait again 6 to 12 hours and then wipe it?
Click to expand...
If it's really dusty than wash. If light dust than just qd and reapply. Remember it's a WIPE ON WALK AWAY sealant.
 
Legacy99 said:
If it's really dusty than wash. If light dust than just qd and reapply. Remember it's a WIPE ON WALK AWAY sealant.
Click to expand...

how much time needs the second layer to dry before wipe it?
 
that's the beauty of it you just put a thin coat on according to the directions, don't get carried away because you'll think you're not putting enough on but you are,and literally walk away, don't buff it don't wipe it, do nothing. it will look better 12 hrs later, then you can put on another coat after you've removed any dust, either by washing or using a qd.
 
is it a good idea to apply something before or after?something like carnauba wax or klasse glaze just to get deeper shine?
 
You must log in or register to reply here.
Back
Top