Duragloss Nu Glass polish

C

chaosboi916

New member
Anybody have any experiences? I needa find a good polish to remove water spots from my wind shield? What pad and speed should i set it at
 
It is a little aggressive...but has not scratched any glass ..and does clean water spots of..and leaves a crystal clear finish...



I have done it with just a foam wax applicator...but with a PC try a polishing pad or finish pad at 3-4 speed..and adjust from there to get where it is working for you



Al
 
I tried it once and applied it with a terry cloth towel and it did nothing for the waterspots that i have. I'll try it with a PC soon.
 
The glass polish is quite abrasive, and works best with machine application. By hand, it just takes too much effort to break the abrasives down fine enough to polish the surface. With a PC, I'd start with a lower setting to spread it around and finish up at a higher speed to completely work the polish into the glass. If there is any haze left on the glass, just use a QD, like FC&S to remove and then buff with a dry towel.
 
I used the Durgloss Glass Polish as well. It did an awesome job on some headlight haze that I had on my 350Z headlights.
 
You must log in or register to reply here.
Back
Top