Does this sound ok.

I

i_needit

New member
:work: Here is my project.

2002 Dodge Ram 1500/QC Garnet Red/ Parked outside Paint Condition swirls,

spider-webbing, comparable to this threads:

http://autopia.org/forum/showthread.php?t=68395



1. Wash Meguiar's NTX Car Wash

2. Clay Bar

3. Wash Meguiar's NTX Car Wash



Applied with Hitachi Rotery

4. Poorboy's SSR 2/LC Green Foam

If not strong enough:

4a.Poorboy's SSR 2.5/LC Green Foam

And if still Not enough:

4b. Poorboy's World Super Swirl Remover 2.5/ LC Orange Foam



Hopefully that will be strong enough, and on to:

Hand Apply

5. Meguiar's Deep Crystal system Polish

6/7. Meguiar's NXT Generation Tech Wax x2



This is the stuff I have on hand to work with, any suggestions? Thanks



Hitachi SP18VA

1 LC Yellow\1 LC Orange\ LC Green\2 LC White\2 LC Black\1 LC Blue

Meguiar's NTX Car Wash

Meguiar's Clay Bar

Meguiar’s Quik Detailer

Poorboy's SSR 2.5

Poorboy's SSR 2

Meguiar's Deep Crystal system Polish

Meguiar's NXT Generation Tech Wax

Meguiar's NXT Generation Spray Wax

Meguiar's Gold Class Liquid Wax

303 Aerospace Protectant

Painters Tape

Plastic
 
Apply Step 5 with the machine & the white pad. Save your arm this way.



You can also skip the second wash if you wipe the lubrication dry after claying.



Dress your exterior trim before polishing, and this will help in clean-up if you get any kind of splatter on it.



Tape over crevices, edges, everything.



What kind of 'plastic' are you talking about?
 
:dance Thanks for the reply, and I'll be using your advice with the prep and step 5 and deleting the wash. The plastic is just to cover the large exterior trim(mirrors, bummper ect..). Once agian thanks for the info. :clap:
 
You must log in or register to reply here.
Back
Top