does anyone use a pc to remove wax

E

ernman

Member
I have a pc and several foam pads and use it to apply wax, but was wondering does anyone use it to remove wax, and if so what pads do you use?



I was thinking of putting a terry cloth cover over one of my foam pads?
 
People have, and some use a cotton or MF towel under the PC with a foam pad, while others use an MF bonnet over the foam pad. However, with the "less is more" technique of apply very thin coats, I can remove wax by hand much faster and easier with an MF by hand.
 
I use MF bonnets from time to time to remove LSPs. Sometimes I use the bonnet first and then do a follow up by hand, sometimes I do it by hand first and then "burnish" the finish with the bonnet. Unless you put the LSP on very thin you'll have to have a bunch of the bonnets as they can load up fast.
 
Depends on the product I am using. Sometimes I'll remove most of the residue by hand and then go over the entire car with several MF bonnets, or if it is a product such as SG, I'll remove everything with the PC.
 
If I am using NXT I will remove it with a M?F under the stock pad that came with the pc .. but if I am using a product that you don't apply to the whole car I do it by hand .. using a pc is a pita a panel at a time.
 
sometimes I do it by hand first and then "burnish" the finish with the bonnet.
Click to expand...
My exact method while using Blackfire or Platinum on dark colors.....There so rich in oils youd be there all day trying to even out the surface.....
 
a.k.a. Patrick said:
My exact method while using Blackfire or Platinum on dark colors.....There so rich in oils youd be there all day trying to even out the surface.....
Click to expand...



Yeah, it was the BF/UPP on the S8 that I was referring to, and it's not even a dark color!
 
You must log in or register to reply here.
Back
Top