imported_skylineawd
New member
Well, I took advantage of the holiday sales and purchased a pretty large order for detailing supplies. Just wanted to know if I left anything out, and had a couple of questions.
Here's the list.
Adam's Car Wash Gallon
Adam's Glass Cleaner 16 oz
P21S Wheel Cleaner Gel Formula 500ml
Adam's Detail Spray 16 oz
Einszett Leather Care 'Lederpflege'
Einszett Cockpit Premium (16,9 fl oz)
Adam's VRT 12 oz
Menzerna Intensive Polish
Menzerna MicroPolish
Menzerna Finishing Glaze PO 115C
Menzerna FMJ 32 oz
CG 5050 Limited Series Concourse Paste Wax
Porter Cable DA Polisher 7336/7424
Porter Cable 6 inch counterweight
CCS Pad 6.5 inch Orange
CCS Pad 6.5 inch White
CCS Pad 6.5 inch Black
Dual-Action Hook & Loop Flexible Backing Plate 6"
DD's Premium Microfiber Towel 16x16 Blue
Swissvax Wheel Brush
Detail Sponge (6)
DD's Jumbo Waffle Microfiber Drying Towel Blue (2)
Microfiber towels (4)
Micro-Restore Microfiber Detergent (32 oz)
Did I leave anything out that yall would recommend. I'm going to try the grout sponge that I read about for washing, unless yall can think of anything else. I already have my buckets and a couple of microfiber wash mitts and a old sponge for my wheels and tires. I also have the Megs clay bar kit.
So for the process I'm going to wash with dawn and then clay bar. After I clay bar do I need to wash with the Adams wash, and then start my Polishing, or is the second wash not needed? I've got a couple spots that need paint correction so I will be giving the PC and Menzerna a try for the first time. Can't wait to try it all out. Also how much of that MF Detergent are yall using. I guess I let them air dry afterwards or is it safe to put them in the dryer. Lastly I'm assuming I can apply the 50/50 over the FMJ, and if so how long do I need to wait for the FMJ to cure before I can apply carnuba overtop.
Thanks,
Shawn
BTW, I'm still learning on all this stuff so any help is appreciated. This is all going to be used on my personnal car, 05.5 Audi A4, Dolphin Gray/Metallic.
Here's the list.
Adam's Car Wash Gallon
Adam's Glass Cleaner 16 oz
P21S Wheel Cleaner Gel Formula 500ml
Adam's Detail Spray 16 oz
Einszett Leather Care 'Lederpflege'
Einszett Cockpit Premium (16,9 fl oz)
Adam's VRT 12 oz
Menzerna Intensive Polish
Menzerna MicroPolish
Menzerna Finishing Glaze PO 115C
Menzerna FMJ 32 oz
CG 5050 Limited Series Concourse Paste Wax
Porter Cable DA Polisher 7336/7424
Porter Cable 6 inch counterweight
CCS Pad 6.5 inch Orange
CCS Pad 6.5 inch White
CCS Pad 6.5 inch Black
Dual-Action Hook & Loop Flexible Backing Plate 6"
DD's Premium Microfiber Towel 16x16 Blue
Swissvax Wheel Brush
Detail Sponge (6)
DD's Jumbo Waffle Microfiber Drying Towel Blue (2)
Microfiber towels (4)
Micro-Restore Microfiber Detergent (32 oz)
Did I leave anything out that yall would recommend. I'm going to try the grout sponge that I read about for washing, unless yall can think of anything else. I already have my buckets and a couple of microfiber wash mitts and a old sponge for my wheels and tires. I also have the Megs clay bar kit.
So for the process I'm going to wash with dawn and then clay bar. After I clay bar do I need to wash with the Adams wash, and then start my Polishing, or is the second wash not needed? I've got a couple spots that need paint correction so I will be giving the PC and Menzerna a try for the first time. Can't wait to try it all out. Also how much of that MF Detergent are yall using. I guess I let them air dry afterwards or is it safe to put them in the dryer. Lastly I'm assuming I can apply the 50/50 over the FMJ, and if so how long do I need to wait for the FMJ to cure before I can apply carnuba overtop.
Thanks,
Shawn
BTW, I'm still learning on all this stuff so any help is appreciated. This is all going to be used on my personnal car, 05.5 Audi A4, Dolphin Gray/Metallic.