Not very much info on the DG website and I had questions regarding DG's new coating so I sent an email to Dr. Bailey one of the owners of DG.
The product is actually named NanoGlass Ceramic Coating (NGCC)--Envirosheild is the name of the kit that includes the coating, Squeaky Clean, applicators and a towel.
Hope this helps clear up questions any of you may have.
Dr. B's responses to my questions begin with an *:
Does NGCC add any extra hardness to the existing clear coat to provide scratch resistance?
*NGCC will add hardness and scratch resistance.
After polishing is it OK to use something other than Squeaky Clean to remove polishing oils such as IPA, Carpro Eraser etc?
*Prior to applying NGCC, you could clean the surface with IPA. I am not familiar with Carpro Erasier.
While applying NGCC how long do you have to remove high spots (with the MF towel) before the product has cured too much to allow this?
*High spots should be buffed quickly before curing.
What is the initial cure time of NGCC? (To keep the vehicle out of rain as an example)
*It is best to wait 24 hours for complete curing.
What is the extended time for the NGCC to reach full hardness?
*Same amount of time for hardness, 24 hours.
Can NGCC be layered on itself? If so are there any advantages to this? How soon can it be layered on itself? If so, how long after application can it be layered?
*NGCC can be layered after 24 hours for the first coat to cure.
Approximately how much of the 4 oz of NGCC should be used for the proper application to say an average mid-sized sedan?
*It should only require approx. 2oz for an average car. A little goes a long way and it is best to apply a thin coat.
Can NGCC be topped with other waxes or sealants? If so, how soon?
*NGCC should not be topped with any wax or sealant.
Can and should NGCC be topped with spray on sealants (such as AquaWax) to extend it's life?
*It is not necessary to top with Aquawax. If you do I would wait at least three months.
As part of maintenance can the coating be clayed without damaging the coating?
*We do not recommend claying which will damage the coating.
Once opened what is the shelf life of the coating remaing in the bottle?
*Shelf life after opening should be at least one year.
Can the applicator pads be cleaned after use so that they can be reused for additional applications? If so what should be used to clean them?
*You could clean the applicator pads with IPA.
A final comment from Dr Bailey.
*This coating is formulated to be used as a final protection, any other coatings over it are not recommended.
EDIT: Additional info from Dr B---
Since you recommend not topping the coating with anything, including AquaWax, is it OK to wash with rinseless washes like Duragloss 931/932 or Optimum No Rinse or should it be washed with traditional car wash soap like 901/902?
*You can use either of the no rinse products , hopefully ours.
The product is actually named NanoGlass Ceramic Coating (NGCC)--Envirosheild is the name of the kit that includes the coating, Squeaky Clean, applicators and a towel.
Hope this helps clear up questions any of you may have.
Dr. B's responses to my questions begin with an *:
Does NGCC add any extra hardness to the existing clear coat to provide scratch resistance?
*NGCC will add hardness and scratch resistance.
After polishing is it OK to use something other than Squeaky Clean to remove polishing oils such as IPA, Carpro Eraser etc?
*Prior to applying NGCC, you could clean the surface with IPA. I am not familiar with Carpro Erasier.
While applying NGCC how long do you have to remove high spots (with the MF towel) before the product has cured too much to allow this?
*High spots should be buffed quickly before curing.
What is the initial cure time of NGCC? (To keep the vehicle out of rain as an example)
*It is best to wait 24 hours for complete curing.
What is the extended time for the NGCC to reach full hardness?
*Same amount of time for hardness, 24 hours.
Can NGCC be layered on itself? If so are there any advantages to this? How soon can it be layered on itself? If so, how long after application can it be layered?
*NGCC can be layered after 24 hours for the first coat to cure.
Approximately how much of the 4 oz of NGCC should be used for the proper application to say an average mid-sized sedan?
*It should only require approx. 2oz for an average car. A little goes a long way and it is best to apply a thin coat.
Can NGCC be topped with other waxes or sealants? If so, how soon?
*NGCC should not be topped with any wax or sealant.
Can and should NGCC be topped with spray on sealants (such as AquaWax) to extend it's life?
*It is not necessary to top with Aquawax. If you do I would wait at least three months.
As part of maintenance can the coating be clayed without damaging the coating?
*We do not recommend claying which will damage the coating.
Once opened what is the shelf life of the coating remaing in the bottle?
*Shelf life after opening should be at least one year.
Can the applicator pads be cleaned after use so that they can be reused for additional applications? If so what should be used to clean them?
*You could clean the applicator pads with IPA.
A final comment from Dr Bailey.
*This coating is formulated to be used as a final protection, any other coatings over it are not recommended.
EDIT: Additional info from Dr B---
Since you recommend not topping the coating with anything, including AquaWax, is it OK to wash with rinseless washes like Duragloss 931/932 or Optimum No Rinse or should it be washed with traditional car wash soap like 901/902?
*You can use either of the no rinse products , hopefully ours.
ray: