Detailed: 2009 ZR-1 Corvette
- Thread starter Glozz
- Start date
Justin Murphy
New member
This is one detail that I have been looking forward to. I've done a few 'Vettes before but this is the daddy of all them. The only problem was....it was black. I'm usually ok with this color but throw in a 150K+ car, hard clear, and picky owner....I was sweating. Oh well. Gotta work!
Detail Description:
Exterior with paint correction and protection.
Goal:
To remove defects, enhance gloss/depth, and protect.
Wash Cycle:
Dawn Wash (2 oz. per 2 gallons of water)...rinse.
then....
Meguiar's Gold Class Wash...rinse.
Clayed using Meguiar's Last touch 1:1
The only areas that had any fallout was the rear spoiler and rear quarter panels.
Paint Correction Phase 1:
Meguiar's 105 via G110 using LC White 5.5" Polishing Pad
I used this combo once I found that 105/Orange Pad was leaving a ton of marring. This new arrangement left a lot more hazing that I was use to as well. After compounding the hood, no other panels were done with 105
A complete wipedown was done using Meguiar's Detailer Line glass cleaner.
Paint Correction Phase 2:
Menzerna's 106FF via G110 using Meguiar's Yellow 2.0 Polishing Pad
This is the one time that this product worked well for me. It melted the holograms away leaving a glossy finish.
A complete wipedown was done using Meguiar's Detailer Line glass cleaner.
Paint Protection:
Pinnacle's Souveran Paste Wax
Meguiar's Ultimate Quick Wax
Wheel Protection:
Meguiar's Ultimate Quick Wax
Tire Protection:
Meguiar's Endurance Tire Gel
Time accumulated:
6 hours
Tons of holograms. The owner said that no detailer has touched the paint. Factory to dealer to him. Oh well.........they were still there.
The swirls showed up too. Looked like marring from washing and a chamois....
More buffer trails....
After 105 only. You can see the marring that I was whining about. Much better though.
This is after 105/106FF and a wipedown. No wax or sealant.
The exterior was re-washed to remove any residue. It was then blown dry and pulled inside. The paint was sealed and then backed out for some beauty shots....
Just needs KITT's scanner bar! This is the car that would have made Knight Rider proud.
Detail Description:
Exterior with paint correction and protection.
Goal:
To remove defects, enhance gloss/depth, and protect.
Wash Cycle:
Dawn Wash (2 oz. per 2 gallons of water)...rinse.
then....
Meguiar's Gold Class Wash...rinse.
Clayed using Meguiar's Last touch 1:1
The only areas that had any fallout was the rear spoiler and rear quarter panels.
Paint Correction Phase 1:
Meguiar's 105 via G110 using LC White 5.5" Polishing Pad
I used this combo once I found that 105/Orange Pad was leaving a ton of marring. This new arrangement left a lot more hazing that I was use to as well. After compounding the hood, no other panels were done with 105
A complete wipedown was done using Meguiar's Detailer Line glass cleaner.
Paint Correction Phase 2:
Menzerna's 106FF via G110 using Meguiar's Yellow 2.0 Polishing Pad
This is the one time that this product worked well for me. It melted the holograms away leaving a glossy finish.
A complete wipedown was done using Meguiar's Detailer Line glass cleaner.
Paint Protection:
Pinnacle's Souveran Paste Wax
Meguiar's Ultimate Quick Wax
Wheel Protection:
Meguiar's Ultimate Quick Wax
Tire Protection:
Meguiar's Endurance Tire Gel
Time accumulated:
6 hours
Tons of holograms. The owner said that no detailer has touched the paint. Factory to dealer to him. Oh well.........they were still there.
The swirls showed up too. Looked like marring from washing and a chamois....
More buffer trails....
After 105 only. You can see the marring that I was whining about. Much better though.
This is after 105/106FF and a wipedown. No wax or sealant.
The exterior was re-washed to remove any residue. It was then blown dry and pulled inside. The paint was sealed and then backed out for some beauty shots....
Just needs KITT's scanner bar! This is the car that would have made Knight Rider proud.
imported_Luster
New member
Hey Justin... Wow! What a ride! That thing looks fantastic. Nice work! :cornut:
Old Pirate
AMG Classic Car Detailing
Great work on the ZR-1 Justin, you got to go with BFWD next time..............Happy Holidays..........:Christmas Hat:
Justin Murphy
New member
ancing Dot:imported_glfahlc
New member
beautiful work on a bewtiful ride justin. i've already informed the wife that when we win the lottery, a zr1 will be my first purchase. shweeet!!!!
imported_RaskyR1
New member
Great work Justin! Beautiful car! :Christmas Hat:
imported_Goose
New member
Nice job, awesome ride!
supercharged
New member
Awesome work, Justin!
*MustangGT/25YRS*
New member
*;O]*
Good Morning/
Dayuum,That looks Fantastic.../:biggrin:Beautiful
and Congrats on the Job.
Regards/
Raymond
Good Morning/
Dayuum,That looks Fantastic.../:biggrin:Beautiful
and Congrats on the Job.
Regards/
Raymond