Cutting or Polishing pad to remove swirls?

M

mark2003

New member
I have a sebring silver car, and it looks great in most lights, but under certain lights at night the swirls seem to be an eyesore...I was wondering if i should use a cut or polishing pad to try and remove these? I was going to use Z-PC to try and rememdy this.



Any suggestions?
 
If you can really see the swirls on a silver car, you probably need to use a cutting pad and then follow up with a polishing pad.
 
Its never been polished?



Cutting pad moderate polish, step down to polishing pad with same polish, then polishing pad with ZPC.
 
Since it's a '93 I'd say go with a polishing pad first and see how you do with that.

You might need a cutting pad but I'd go with the safer route first especially if your car's clear-coated.
 
Im using OCP and had to use a light cut pad to remove light to moderate swirls by PC. for moderate to slightly heavy swirls i have to use OCC with megs cutting pad, followed by OCP and polishing pad. but either way just take your time and check your work as you go.
 
You must log in or register to reply here.
Back
Top