Cure time between coats?

[djmn]

I plan on doing a 3 step process:

1) Klasse AIO

2) Klasse SG

3) S100



I plan on applying te SG with the BillNorth wipe on/off method. I know if I want to apply more than one coat of SG I need to let it "cure" 24hours between coats.

My question is, is there any cure time between the 3 diferent products? In theory, if I only applied one coat of each I could do all three steps in one afternoon?

 

[togwt]

~One man’s opinion / observations ~



The theory is-

Klasse AIO and SG = 1-2 hours, SG and S100 allow anything from 12 to 72 hours to elapse to enable product to cross-link before the application of other products (S100). Avoid rain or washing vehicle until fully cured



~Hope this helps~



Experience unshared; is knowledge wasted…/ Jon

justadumbarchitect * so I question everything *

 

[djmn]

Sorry, i'm not fully understanding.

So you're saying I could apply the AIO wait an hour or two and then apply the SG. Then wait 12 to 72 hours before applying the S100?

 

[Jesstzn]

Sorry, i'm not fully understanding.

So you're saying I could apply the AIO wait an hour or two and then apply the SG. Then wait 12 to 72 hours before applying the S100?

Exactly

 

[pocus244]

PMFJI, but I have applied a coat of the Klasse AIO. I let it cure for about a week and then applied P21S carnuba wax.



How long should the wax cure before applying the Klasse gloss sealant glaze? I assume a week would do. Correct or nay?

 

[superstring]

Originally posted by Dave Buswell

PMFJI, but I have applied a coat of the Klasse AIO. I let it cure for about a week and then applied P21S carnuba wax.



How long should the wax cure before applying the Klasse gloss sealant glaze? I assume a week would do. Correct or nay?

Dave, the Klasse SG goes on over the AIO. SG doesn't bond to wax.