clear coat failing

[derek collier]

ok...i wasnt sure where to post this, so sorry if it is in the wrong spot.



my clear coat is starting to peal up in a VERY small area( like maybe 1/4'' x 1/8""). is there anyting i can do to keep it from peeling anymore?

 

[imported_steveo3002]

you could scrape off the loose stuff and brush on a neat blob of fresh clear coat...it might help it last a little better , but expect it to spread sooner or later

 

[derek collier]

anyone else? i really dont want to have to get my car repainted.:wall :help:

 

[David Fermani]

Could you cut the perimeter of the peeling area with a brand new razor blade to create a barrier to the peeling temporarily? Once peeling starts, it's usually means that eventually the whole surface will end up lifting. Re-clearcoating a panel isn't that expensive to have done.

 

[derek collier]

Could you cut the perimeter of the peeling area with a brand new razor blade to create a barrier to the peeling temporarily? Once peeling starts, it's usually means that eventually the whole surface will end up lifting. Re-clearcoating a panel isn't that expensive to have done.

anyone want to verify this will work?

 

[David Fermani]

Will it work? No. But it *might* prolong your clearcoat deteriation.