Cleaning PC pads..

[Dcestylzdtailer]

What should i use to clean the Green orange and white PC pads? I heard you can use the dish washer detergiant but not sure... let me know.. :thx

 

[Old Pirate]

I use Dawn Power Dissolver on my pads.

 

[JustinL]

I just use some Spray Nine All Purpose Cleaner, let it sit for a minute, and hose it down. Then squeeze out excess water and let air dry.

 

[RTexasF]

I throw mine in the washer with mild detergent and let her rip! Haven't lost even one in five years. Same with the Cyclo pads.

 

[MatrixXRS]

I use Dawn Power Dissolver on my pads.

Make that x2. Works really well to remove all polishes, glazes, and/or waxes.

 

[Dcestylzdtailer]

Yea i used ivory grease remover soap and it work pretty good getting off the menzerna...

 

[imported_DetailDan]

Dawn......

 

[mikebai1990]

I soak it in a heavy solution of Woolite+water. I pretreat with Simple Green. After a few hours, I massage the dirty stuff out. Seems to work fairly well.

 

[imported_FMINUS]

I use dawn power dissolver, it works better than any "pad cleaner" ive tried.



After a while, when they get old, I use the DP pad rejuvenator.

 

[BlueLibby04]

Dawn by hand..

 

[pt91]

Dawn Power Dissolver. wish they offered a biggie sized version.

 

[P1et]

I use the Wolfgang stuff, mix the stuff with warm water and just let it sit in there. Works great.

 

[Harry Houdini]

I use System-3000 from Autogeek, I can use a white pad on a rotary with a menzerna 106

FF after I am done; wash it in the bucket with DP Pad rejuvenator and dry it in seconds

all inside the bucket and then place the nicely damped white pad on PC with a glaze

before LSP. What ever color that product is in my case was grey “106� its done in a

minute and the pad is ready. One of the best products I have bought to date.

 

[Adam's Polishes]

wash with a heavy stream of water, a little APC, and squeeze the excess water out, airdry