CG's Wet Mirror vs. EZ Creme Glaze?

[stiffdogg06]

The second picture of the side by side comparison, the left side looked more wet.



Also, I can see the tape line :doh

 

[kapinnn]

The second picture of the side by side comparison, the left side looked more wet.



Also, I can see the tape line :doh

Busted! That the side I did 106FF on.



I tested SIP and 106FF and didnt see much more improvement on the 106FF except that clear was literally squeaky clean. This morning I noticed that the elft side looked better... I also applied another coat of WMF.



I don't see the tape line though, which picture is it on? I only taped trim and door handles.



Now, two things about WMF. It seems to dust a bit more than I'm used to when buffing. I had cleaned the crevices nicely and it all acumulated there when I buffed. The second thing is that the first coat was a bit hard to remove. Maybe applying it over the whole car and then buffing is not a good idea. Or I may have put too much in some spots. I used some Final Inspection and it all came off with no effort whatsoever.

 

[ThEGuN1]

Busted! That the side I did 106FF on.



I tested SIP and 106FF and didnt see much more improvement on the 106FF except that clear was literally squeaky clean. This morning I noticed that the elft side looked better... I also applied another coat of WMF.



I don't see the tape line though, which picture is it on? I only taped trim and door handles.



Now, two things about WMF. It seems to dust a bit more than I'm used to when buffing. I had cleaned the crevices nicely and it all acumulated there when I buffed. The second thing is that the first coat was a bit hard to remove. Maybe applying it over the whole car and then buffing is not a good idea. Or I may have put too much in some spots. I used some Final Inspection and it all came off with no effort whatsoever.

Which glaze do you like better? May I ask if you take take more pictures as it is sometime hard to tell ...too much reflections!! :bolt

 

[kapinnn]

The car is with the owner now, so I can't take any more.



From what I could tell the WMF is not really a glaze and more like a sealant. I really did not notice much filling from either one. I have a black Z and will de doing it with both products. Let me know what kind of pics you want. I was thinking of EZCG vs WMF on a un-polished panel and on a polished panel. Maybe using the halogens...



Here are the pics I took the next morning. There are still a few swirls and scratches, but overall a decent job.